Cabletron Systems 9032578-05 manual Importing a Selected Subset of OSPF-ASE Routes

Chapter 13: Routing Policy Configuration Guide

The following configuration commands for router R1:

•Determine the IP address for each interface

•Specify the static routes configured on the router

•Determine its OSPF configuration

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Create the various IP interfaces. !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

interface create ip to-r2 address-netmask 120.190.1.1/16 port et.1.2 interface create ip to-r3 address-netmask 130.1.1.1/16 port et.1.3 interface create ip to-r41 address-netmask 140.1.1.1/24 port et.1.4 interface create ip to-r42 address-netmask 140.1.2.1/24 port et.1.5 interface create ip to-r6 address-netmask 140.1.3.1/24 port et.1.6 !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Configure default routes to the other subnets reachable through R2. !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ip add route 202.1.0.0/16 gateway 120.1.1.2 ip add route 160.1.5.0/24 gateway 120.1.1.2

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Box Level Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ospf start

ospf create area 140.1.0.0 ospf create area backbone ospf set ase-defaults cost 4

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Interface Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ospf add interface 140.1.1.1 to-area 140.1.0.0 ospf add interface 140.1.2.1 to-area 140.1.0.0 ospf add interface 140.1.3.1 to-area 140.1.0.0 ospf add interface 130.1.1.1 to-area backbone

Importing a Selected Subset of OSPF-ASE Routes

1.Create a OSPF import source so that only routes that have a tag of 100 are considered for importation.

ip-router policy create ospf-import-source ospfImpSrct100 tag 100

2.Create the Import-Policy importing all OSPF ASE routes with a tag of 100 except the default ASE route.

ip-router policy import source ospfImpSrct100 network all ip-router policy import source ospfImpSrct100 network default restrict

186 SmartSwitch Router User Reference Manual