Cabletron Systems 9032578-05 manual

Chapter 12: BGP Configuration Guide

Router SSR11 has router SSR12 and router SSR13 as client peers and router SSR10 as non- client peer. The following line in router SSR11’s configuration file specifies it to be a route reflector

bgp set peer-group rtr11 reflector-client

Even though the IBGP Peers are not fully meshed in AS 64901, the direct routes of router SSR14, that is, 192.68.222.0/24 in AS 64902 (which are redistributed in BGP) do show up in the route table of router SSR8 in AS64900, as shown below:

*********************************************
* Route Table (FIB) of Router 8	*
*********************************************

rtr-8# ip show routes
Destination	Gateway	Owner	Netif
-----------	-------	-----	-----
10.50.0.0/16	directly connected	-	en
127.0.0.0/8	127.0.0.1	Static	lo
127.0.0.1	127.0.0.1	-	lo
172.16.20.0/24	directly connected	-	mls1
172.16.70.0/24	172.16.20.2	BGP	mls1
172.16.220.0/24	172.16.20.2	BGP	mls1
192.68.11.0/24	directly connected	-	mls0
192.68.20.0/24	172.16.20.2	BGP	mls1
192.68.222.0/24	172.16.20.2	BGP	mls1

The direct routes of router SSR8, i.e. 192.68.11.0/24 in AS64900 (which are redistributed in BGP), do show up in the route table of router SSR14 in AS64902, as shown below:

**********************************************************

* Route Table (FIB) of Router 14*

**********************************************************

rtr-14# ip show routes

Destination	Gateway	Owner	Netif
-----------	-------	-----	-----
10.50.0.0/16	directly connected	-	en0
127.0.0.0/8	127.0.0.1	Static	lo0
127.0.0.1	127.0.0.1	-	lo0
172.16.20.0/24	192.68.20.1	BGP	mls1
172.16.30.0/24	192.68.20.1	BGP	mls1
172.16.90.0/24	192.68.20.1	BGP	mls1
192.68.11.0/24	192.68.20.1	BGP	mls1
192.68.20.0/24	directly connected	-	mls1
192.68.222.0/24	directly connected	-	mls0

SmartSwitch Router User Reference Manual

159

Image 185

Cabletron Systems 9032578-05 manual SmartSwitch Router User Reference Manual 159

Contents

9032578-05 SmartSwitch Router User Reference Manual Changes CopyrightDisclaimer Trademarks Regulatory Compliance Statements Regulatory Compliance Information Vcci Compliance Statement Industry Canada Compliance Statement Laser Radiation and Connectors Safety Information Class 1 Laser Transceivers Cabletron Systems, Inc Program License Agreement SmartSwitch Router User Reference Manual Vii Viii SmartSwitch Router User Reference Manual SmartSwitch Router User Reference Manual Cabletron Systems Limited Program License Agreement Cabletron Systems Limited Program License Agreement Declaration of Conformity Addendum Contents SmartTRUNK Configuration Guide Dhcp Configuration Guide Vrrp Configuration Guide 111 160 Routing Policy Configuration Guide 161 197 Firewall Load Balancing 214 Monitoring IP Policies 215 Network Address Translation Configuration Guide 249 QoS & Layer-2/Layer-3/Layer-4 Flow Overview 291 Security Configuration Guide 275 309 Lfap Configuration Guide 329 357 Contents Xxvi SmartSwitch Router User Reference Manual Related Documentation About This ManualDocument Conventions For Information About See Optional Keywords and arguments within a set of square brackets areKeywords or arguments separated by vertical bars indicate a Choice. Select one keyword or argument Chapter Introduction Configuration Files Command Modes Using the Command Line InterfaceUser Mode Enable Mode Boot Prom Mode Getting Help with CLI CommandsConfigure Mode CLI completes the command as follows CLI Line Editing Commands Line Editing Commands Previous command from history buffer Next command from history bufferWord-backward command Show all commands currently stored in the history buffer Commands to Display and Change Configuration Information Displaying and Changing Configuration Information Erase scratchpad Task CommandErase startup Save active Each port in the SSR is referred to in the following manner Port NamesPort Numbers for Line Cards Line Card Port Number Arrangement Left to Right Hssi WAN Base LLX Quad Serial WAN Hot Swapping Overview Chapter Hot Swapping Line Cards Control Modules Deactivating the Line Card Hot Swapping Line Cards Hot Swapping One Type of Line Card With Another Installing a New Line CardRemoving the Line Card Deactivating the Control Module Hot Swapping a Secondary Control Module Removing the Control Module Installing a Control Module Hot Swapping a Switching Fabric Module SSR 8600 only Installing a Switching Fabric Module Removing the Switching Fabric ModulePage Spanning Tree Ieee 802.1d Chapter Bridging Configuration GuideBridging Overview Bridging Modes Flow-Based and Address-Based Vlan Overview MAC-address-based VLANs Port-based VLANsProtocol-based VLANs Subnet-based VLANs Multicast-based VLANs SSR Vlan SupportPolicy-based VLANs VLANs and the SSR Ports, VLANs, and L3 Interfaces Access Ports and Trunk Ports 802.1Q support Explicit and Implicit VLANs Configuring SSR Bridging FunctionsConfiguring Address-based or Flow-based Bridging Address-Based Bridge Table Flow-Based Bridge Table SSR More ports for a particular Vlan Configuring Spanning TreeAdjusting Spanning-Tree Parameters Assigning Port Costs Setting the Bridge PrioritySetting a Port Priority Adjusting the Interval between Hello Times Adjusting Bridge Protocol Data Unit Bpdu IntervalsDefining the Forward Delay Interval Defining the Maximum Age Configuring Vlan Trunk Ports Configuring a Port- or Protocol-Based VlanCreating a Port or Protocol Based Vlan Adding Ports to a Vlan Configuring Layer-2 Filters Configuring VLANs for Bridging Creating an IP or IPX Vlan Configuration ExamplesMonitoring Bridging Next, assign ports to the ‘RED’ Vlan Creating a non-IP/non-IPX Vlan Overview Chapter SmartTRUNK Configuration Guide Add Physical Ports to the SmartTRUNK Configuring SmartTRUNKsCreating a SmartTRUNK Specify Traffic Distribution Policy Optional Monitoring SmartTRUNKs St.2 St.4 Router Switch Server Example Configurations SmartTRUNK Configuration Guide Page Virtual Channels Chapter ATM Configuration GuideATM Overview Atm create vcl port port list Service Class DefinitionCreating a Virtual Channel Creating a Service Class Definition Applying a Service Class Definition Atm set port port list pdh-cell-scramble on off Cell ScramblingEnabling Cell Scrambling Selecting the Cell Mapping Format Cell MappingPdh-cell-scramble onoff Atm set port port list cell-mapping direct plcp Atm set port port list vpi-bits num Setting the Bit Allocation for VPICreating a Non-Zero VPI Atm show vpl port port list all-ports Displaying ATM Port Information Atm show serviceall B3ZS Atm show port-settings port list all-ports For T1 framing Esf indicates extended super frame and is usedG832 is used for E3 framing G751 is used for E3 framing Consider the following network configuration ATM Sample Configuration Defining an ATM Service Class Configuring an Interface on an Ethernet Port Configuring an IP Route Applying an ATM Service ClassConfiguring an Interface on an ATM Port Ssr1config# ip add route 11.1.2.0/24 gateway ATM Sample Configuration Chapter Packet-over-SONET Configuration Guide Configuring IP Interfaces for PoS Links Configuring Packet-over-SONET Links Configuring Automatic Protection Switching Configuring Working and Protecting Ports Specifying Bit Error Rate Thresholds Threshold Specify signal failure BER Specify signal degrade BERMonitoring PoS Ports Threshold Following is the configuration for router a This section shows example configurations for PoS linksFollowing is the configuration for router B APS PoS Links Between SSRs Router So.6.1 So-1 40.1.1.1/16 PoS Link Between the SSR and a Cisco Router Router So.6.1 Bridging and Routing Traffic Over a PoS LinkPage Dhcp Overview Configuration GuideChapter Configuring an IP Address Pool Configuring DhcpConfiguring Client Parameters Client Parameters Grouping Scopes with a Common Interface Configuring a Static IP Address Monitoring the Dhcp Server Configuring Dhcp Server ParametersUpdating the Lease Database Define Dhcp network parameters for the scope ‘scope1’ Dhcp Configuration ExamplesDefine an IP address pool for addresses 10.1.1.10 through Define a static IP address for Configuring Secondary Subnets Include ‘scope2’ in the superscope ‘super1’ Secondary Subnets and Directly-Connected Clients Interacting with Relay Agents Define the address pool for ‘scope1’ Page Unicast Routing Protocols Chapter IP Routing Configuration GuideIP Routing Protocols Multicast Routing Protocols Configuring IP Interfaces and Parameters Specifying Ethernet Encapsulation Method Configuring IP Interfaces to PortsConfiguring IP Interfaces for a Vlan Configuring Jumbo Frames Configuring ARP Cache Entries Configuring Address Resolution Protocol ARPTo clear the entire ARP table Unresolved MAC Addresses for ARP Entries Configuring Proxy ARP Configuring Reverse Address Resolution Protocol Rarp Defining MAC-to-IP Address Mappings Specifying IP Interfaces for Rarp Configuring IP Services Icmp Configuring DNS ParametersConfiguring IP Helper Monitoring Rarp Configuring Direct Broadcast Monitoring IP Parameters Configuring Denial of Service DOS Arp show all Configuring Router DiscoveryInterface show ip System show dns Ssrconfig# rdisc add address Ssr# rdisc show all To display router discovery information Assigning IP/IPX Interfaces Vrrp Overview Configuring Vrrp Backup Basic Vrrp ConfigurationConfiguration of Router R1 Following is the configuration file for Router R1 in Figure Following is the configuration file for Router R2 in Figure Symmetrical ConfigurationConfiguration for Router R2 Symmetrical Vrrp Configuration Master for VRID=1 Master for VRID=2 Backup for VRID=2 Configuration of Router R2 Multi-Backup Configuration Multi-Backup Vrrp Configuration Configuration of Router R1 Virtual Router Default Priority Configured Priority Following is the configuration file for Router R3 in Figure Additional ConfigurationConfiguration of Router R3 Setting Pre-empt Mode Setting the Backup PrioritySetting the Advertisement Interval Ip-redundancy trace Setting an Authentication KeyMonitoring Vrrp Ssr# ip-redundancy show vrrp interface int1 Ip-redundancy show Ssr# ip-redundancy show vrrp 1 interface int1 verbose Vrrp Configuration Notes 104 RIP Overview Chapter RIP Configuration GuideConfiguring RIP Enabling and Disabling RIP Configuring RIP InterfacesConfiguring RIP Parameters Characters Set the authentication method Set the authentication methodTo RIP Specify that RIP V2 packets Monitoring RIP Configuring RIP Route PreferenceConfiguring RIP Route Default-Metric Configuration Example 110 Ospf Overview Ospf Ospf Multipath Configuring Ospf Ospf Interface Parameters Configuring Ospf Interface ParametersEnabling Ospf Port Media Type Speed Ospf Default Cost Default Cost of an Ospf InterfaceOspf Default Cost Per Port Type Add an interface to an Ospf area Configuring an Ospf AreaCreate an Ospf area Creating Virtual Links Configuring Ospf Area ParametersAdd a stub host to an Ospf area Add a network to an Ospf area for Create a virtual Configuring Ospf for Different Types of InterfacesLink Set virtual link Monitoring Ospf Configured for Ospf Monitor Ospf error conditionsShow Ospf errors Show information about all interfaces Routes Show Ospf timers Ospf Configuration ExamplesShows information about all valid next Shows information about Ospf Border Exporting All RIP, Interface & Static Routes to Ospf Exporting All Interface & Static Routes to Ospf Create a Ospf export destination for type-2 routes Create a Ospf export destination for type-1 routesCreate a RIP export source Create a Static export source Create OSPF-ASE export source Create a RIP export destinationCreate Ospf export source R10 BGP Overview Chapter BGP Configuration Guide SSR BGP Implementation Basic BGP Tasks Setting the Router ID Setting the Autonomous System NumberConfiguring a BGP Peer Group Ip-router global set autonomous-system num1 loops num2 Autonomous-system number Where Starting BGP Using AS-Path Regular ExpressionsAdding and Removing a BGP Peer 130 To import MCI routes with a preference Using the AS Path Prepend FeatureAS-Path Regular Expression Examples Following is an example BGP Configuration Examples BGP Peering Session Example Physical Link Peering Relationship CLI configuration for router SSR1 is as followsAS-1 AS-2 CLI configuration for router SSR2 is as follows Ibgp Configuration ExampleGated.conf file for router SSR1 is as follows Gated.conf file for router SSR2 is as follows Ibgp Routing Group Example AS-64801 Sample Ibgp Configuration Routing Group Type Following lines in the Cisco router configure Ospf Ibgp Internal Group Example Sample Ibgp Configuration Internal Group Type Illustrates a sample Ibgp Internal group configuration SmartSwitch Router User Reference Manual 141 Configuration for router C2 a Cisco router is as follows Ebgp Multihop Configuration ExampleConfiguration for router C1 a Cisco router is as follows Physical Link AS-64800 CLI configuration for router SSR3 is as follows Community Attribute Example CLI configuration for router SSR4 is as followsGated.conf file for router SSR3 is as follows Gated.conf file for router SSR4 is as follows Sample BGP Configuration Specific Community Sample BGP Configuration Well-Known Community , router SSR11 has the following configuration , router SSR13 has the following configuration , router SSR14 has the following configuration , router SSR10 has the following configuration SmartSwitch Router User Reference Manual 151 Local Preference Examples Sample BGP Configuration Local Preference For router SSR13, local-prefis set to Using the local-pref OptionUsing the set-pref Option Multi-Exit Discriminator Attribute Example Sample BGP Configuration MED Attribute Ebgp Aggregation Example Router SSR6 has the following CLI configurationAS-64900 AS-64901 Route Reflection Example Router SSR8 has the following CLI configurationRouter SSR9 has the following CLI configuration AS-64902 Shows a sample configuration that uses route reflection SmartSwitch Router User Reference Manual 159 160 Route Import and Export Policy Overview Chapter Routing Policy Configuration Guide Preference Default Preference ValuesPreference Defined by CLI Command Default Import-Source Import Policies Route-Filter Export PoliciesExport-Destination Export-Source Specifying a Route Filter Aggregates and Generates Aggregate-Source Aggregate-Destination Authentication Methods Authentication Authentication Keys and Key Management Configuring Simple Routing Policies Redistributing Directly Attached Networks Redistributing Static Routes Redistributing RIP into Ospf Redistributing RIP into RIPRedistributing Ospf to RIP Redistributing Aggregate Routes To redistribute aggregate Simple Route Redistribution ExamplesRoutes into Ospf Example 1 Redistribution into RIP Example 2 Redistribution into Ospf Exporting a Given Static Route to All RIP InterfacesExporting All Static Routes to All RIP Interfaces 174 Configuring Advanced Routing Policies 176 Creating an Export Source Creating an Export Destination Creating a Route Filter Creating an Import SourceCreate a RIP import Destination Create an Ospf import Creating an Aggregate Route Creating an Aggregate Source Creating an Aggregate DestinationExamples of Import Policies Example 1 Importing from RIP R41 182 Rip add source-gateways 140.1.1.41 rip add trusted-gateways Example 2 Importing from Ospf 185 Routing Policy Configuration Importing a Selected Subset of OSPF-ASE Routes Example 1 Exporting to RIP Examples of Export Policies 188 Exporting a Given Static Route to a Specific RIP Interface 190 Exporting Aggregate-Routes into RIP Example 2 Exporting to Ospf SmartSwitch Router User Reference Manual 193 194 SmartSwitch Router User Reference Manual 195 196 Igmp Overview Chapter Multicast Routing Configuration GuideIP Multicast Overview Dvmrp Overview Configuring Igmp on an IP Interface Configuring IgmpConfiguring Igmp Query Interval Configuring Igmp Response Wait Time Configuring Per-Interface Control of Igmp Membership Configuring DvmrpConfiguring Static Igmp Groups Ship to a specific group Starting and Stopping Dvmrp Configuring Dvmrp on an InterfaceConfiguring Dvmrp Parameters Configuring Dvmrp TTL & Scope Configuring the Dvmrp Routing Metric Monitoring Igmp & Dvmrp Configuring a Dvmrp TunnelShows all the interfaces Membership details running Igmp Shows all Igmp group Memberships on a port basis Show all Igmp timersShow information about multicasts Registered by Igmp Show Igmp status on a Vlan SmartSwitch Router User Reference Manual 205 206 Chapter IP Policy-Based Forwarding Configuration Guide Associating the Profile with an IP Policy Configuring IP PoliciesDefining an ACL Profile Creating Multi-Statement IP Policies Setting the IP Policy Action Applying an IP Policy to Locally Generated Packets Setting Load Distribution for Next-Hop GatewaysApplying an IP Policy to an Interface Routing Traffic to Different ISPs IP Policy Configuration Examples Using an IP Policy to Prioritize Service to Customers Prioritizing Service to Customers Using an IP Policy to Authenticate Users Through a Firewall Authenticating Users through a Firewall Selecting Next Hop Gateway from IP Packet Information Firewall Load Balancing Monitoring IP Policies Following is the configuration for Policy Router 1 in Figure Ssr# ip-policy show policy-name p1 SmartSwitch Router User Reference Manual 217 218 Chapter Network Address Translation Configuration Guide Setting Inside and Outside Interfaces Configuring NAT Forcing Flows through NAT Setting NAT RulesStatic Dynamic NAT and DNS Managing Dynamic Bindings NAT and Icmp Packets Specify the FTP session timeoutNAT and FTP Specify the FTP control port This section shows examples of NAT configurations Static ConfigurationMonitoring NAT Next, define the interfaces to be NAT inside or outside Using Static NAT Dynamic Configuration Using Dynamic NAT Using Dynamic NAT with IP Overload Dynamic NAT with IP Overload PAT Configuration DNS Dynamic NAT with DNS Dynamic NAT with Outside Interface Redundancy Using Dynamic NAT with DNS Using Dynamic NAT with Matching Interface Redundancy Chapter Web Hosting Configuration Guide Load Balancing Configuring Load BalancingCreating the Server Group Adding Servers to the Load Balancing Group Session Persistence Sticky Minutes Persistence Default Binding Level Timeout Specifying a Connection Threshold Optional Group or Server Operating ParametersSpecifying Load Balancing Policy Verifying Servers and Applications Specify application verification Setting Server StatusVerifying Extended Content Load Balancing and FTP Allowing Access to Load Balancing ServersSetting Timeouts for Load Balancing Mappings Displaying Load Balancing Information Configuration Examples 10.1.1.4 Internet Web requests Web requests forwarded to One of the servers Router Domain Name Virtual IP TCP Port Real Server 207.135.89.16 207.135.89.17 207.135.89.18 207.135.89.50 Virtual IP Address Ranges Session and Netmask Persistence Creating the Cache Group Configuring Web CachingWeb Caching Redirected to cache servers Specifying the Clients for the Cache Group OptionalNot redirected to cache servers Redirecting Http Traffic on an Interface Bypassing Cache Servers Configuration ExampleOther Configurations Proxy Server Redundancy Distributing Frequently-Accessed Sites Across Cache ServersMonitoring Web-Caching Show cache server information Show caching policy information RIP Routing Information Protocol Chapter IPX Routing Configuration GuideIPX Routing Overview SAP Service Advertising Protocol IPX Addresses Configuring IPX RIP & SAPCreating IPX Interfaces Configuring IPX Addresses to Ports Configuring IPX Interfaces and ParametersConfiguring Secondary Addresses on an IPX Interface Configuring IPX Interfaces for a Vlan Specifying IPX Encapsulation Method Configuring IPX RoutingEnabling IPX RIP Enabling SAP Configuring Static SAP Table Entries Configuring Static RoutesControlling Access to IPX Networks Creating an IPX Access Control List Creating an IPX SAP Access Control List Creating an IPX Type 20 Access Control List Creating an IPX RIP Access Control List Creating an IPX GNS Access Control List Monitoring an IPX Network 258 Chapter Access Control List Configuration Guide Defining Selection Criteria in ACL Rules ACL Basics SmartSwitch Router User Reference Manual 261 Implicit Deny Rule How ACL Rules are Evaluated Allowing External Responses to Established TCP Connections Editing ACLs Offline Following ACL illustrates this featureCreating and Modifying ACLs Maintaining ACLs Using the ACL Editor These uses of ACLs are described in the following sections Using ACLsApplying ACLs to Interfaces Applying ACLs to Layer-4 Bridging Ports Applying ACLs to Services SSR Feature ACL Profile Usage Using ACLs as Profiles Using Profile ACLs with the Traffic Rate Limiting Facility Using Profile ACLs with the IP Policy Facility Using Profile ACLs with Dynamic NAT Using Profile ACLs with the Web Caching Facility Using Profile ACLs with the Port Mirroring Facility Preventing Web Objects From Being Cached Redirecting Http Traffic to Cache Servers Enabling ACL Logging Monitoring ACLs Security Overview Chapter Security Configuration Guide Configuring Radius Configuring SSR Access Security Monitoring Tacacs Configuring TacacsMonitoring Radius Configuring Tacacs Plus Monitoring Tacacs Plus Configuring PasswordsLayer-2 Security Filters Configuring Layer-2 Address Filters Configuring Layer-2 Static Entry Filters Configuring Layer-2 Port-to-Address Lock FiltersConfigure a source static Configure a destination static Configure a source secure port Configuring Layer-2 Secure Port FiltersConfigure a destination secure Port filter Layer-2 Filter Examples Monitoring Layer-2 Security Filters Port-to-Address Lock Examples Static Entries Example Example 2 Secure Ports Layer-3 Access Control Lists ACLs Sample Vlan for Layer-4 bridging Layer-4 Bridging and Filtering Creating a Port-Based Vlan for Layer-4 Bridging For example, to enable Layer-4 Bridging on the blue VlanPlacing the Ports on the Same Vlan Enabling Layer-4 Bridging on the Vlan Applying a Layer-4 Bridging ACL to a Port SmartSwitch Router User Reference Manual 289 290 QoS & Layer-2/Layer-3/Layer-4 Flow Overview Chapter QoS Configuration Guide Layer-2 and Layer-3 & Layer-4 Flow Specification SSR Queuing Policies Traffic Prioritization for Layer-2 FlowsPrecedence for Layer-3 Flows Control Configuring Layer-2 QoS802.1p Priority Mapping Removing or Disabling Per-Port Priority Map Creating and Applying a New Priority Map Displaying Priority Map Information Configuring IP QoS PoliciesTraffic Prioritization for Layer-3 & Layer-4 Flows Setting an IP QoS Policy Configuring IPX QoS PoliciesSetting an IPX QoS Policy Specifying Precedence for an IP QoS Policy Specifying Precedence for an IPX QoS Policy Configuring SSR Queueing PolicyAllocating Bandwidth for a Weighted-Fair Queuing Policy ToS Rewrite Weighted Random Early Detection Wred Tos-rewrite Configuring ToS Rewrite for IP Packets Tos-precedence-rewrite = 5 tos-rewrite = Monitoring QoS Rate Limiting Modes Limiting Traffic Rate Port Rate Limiting Per-Flow Rate LimitingPolicy Apply a per-flow rate limit Define a port rate limit policy to Aggregate Rate LimitingLimit incoming traffic on a port Limit outgoing traffic on a port Per-Flow Rate Limiting Example Configurations Aggregate Rate Limiting Displaying Rate Limit Information Performance Monitoring Overview Chapter Performance Monitoring Guide Show information about the master Show port error statisticsMAC table Show information about a Particular MAC address Show info about multicasts Only IP ACLs can be specified for port mirroring Configuring the SSR for Port MirroringMonitoring Broadcast Traffic 312 Rmon Overview Rmon Example of Rmon Configuration Commands Configuring and Enabling Rmon Lite Rmon Groups Rmon Groups Professional Rmon Groups Standard Rmon Groups Control Tables Using Rmon Configuring Rmon Groups Num status enabledisable EnabledisableString status enabledisable Size owner string status enabledisable Oid type absolutedelta status enabledisable Port port owner string status enabledisableRmon protocol-distribution index index-number Rmon user-history-control index index-number Displaying Rmon Information Rmon CLI Filters 01000CCCCCCC Following shows Host table output without a CLI filter Creating Rmon CLI Filters Troubleshooting RmonUsing Rmon CLI Filters 326 Ssr# rmon show status Allocating Memory to Rmon Rmon set memory number Lfap Configuring the Lfap Agent on the SSR Cabletron’s Traffic Accounting Services Allow external ACL policy control Start the Lfap protocol on the SSR Monitoring the Lfap Agent on the SSR Command Displays WAN Overview WAN Primary and Secondary Addresses Configuring WAN InterfacesStatic, Mapped, and Dynamic Peer IP/IPX Addresses Static Addresses Following command line displays two examples for PPP Following command line displays an example for a VlanMapped Addresses Dynamic Addresses Packet Compression Following command line displays an example for PPPForcing Bridged Encapsulation Average Packet Size Example ConfigurationsNature of the Data Link Integrity Packet Encryption WAN Quality of Service Source Filtering and ACLs Weighted-Fair QueueingCongestion Management Random Early Discard RED Adaptive Shaping Frame Relay OverviewVirtual Circuits Permanent Virtual Circuits PVCs Configuring Frame Relay Interfaces for the SSR Applying a Service Profile to an Active Frame Relay WAN Port Setting up a Frame Relay Service Profile Monitoring Frame Relay WAN Ports Frame Relay Port Configuration 344 Use of LCP Magic Numbers Configuring PPP InterfacesPoint-to-Point Protocol PPP Overview Defining the Type and Location of a PPP Interface Setting up a PPP Service Profile Compression on MLP Bundles or Links Applying a Service Profile to an Active PPP PortConfiguring Multilink PPP Bundles Monitoring PPP WAN Ports PPP Port Configuration Ssrconfig# ppp apply service profile2 ports hs.5.1 Simple Configuration File WAN Configuration Examples Multi-router WAN configuration Multi-Router WAN Configuration Following configuration file applies to Router R1 Router R1 Configuration FileRouter R2 Configuration File Following configuration file applies to Router R2 Following configuration file applies to Router R3 Router R3 Configuration FileRouter R4 Configuration File Following configuration file applies to Router R4 Following configuration file applies to Router R5 Router R5 Configuration FileRouter R6 Configuration File Following configuration file applies to Router R6 SmartSwitch Router User Reference Manual 355 356 Introduction Appendix a New Features Supported on Line CardsSSR 8000/8600 Line Cards Line Cards Available Prior to the 3.0 Firmware Release WFQ Pre-3.0 SSR Firmware Line Card Part Number Features Listed 3.0 Features Line Card Part Firmware Number FeaturesLine Cards Introduced at the 3.1 Firmware Release T-Series Pre-3.0 POS OC-12cSMF SSR-ATM29-02 ATM OC-3c SSR-ATM31-02 ATM OC-12c Routing Table on Pre-3.0 Line card SSR-2-LX70 SSR 2000 Line CardsAAs -- Chassis AAs Line Cards SSR-2-LX70-AA New Features that Require Specific Line CardsNetwork Address Translation Page Load Balancing Lsnat Layer 4 Bridging Per-Protocol Vlan Port Rate Limiting QoS Rate Limiting Multiple IPX Encapsulation ToS RewriteEstablished Bit ACL Port Interface Ingress Port Egress Port Features Base Weighted Random Early Detection WredSummary Jumbo Frames Example Identifying a Line CardMultiple IPX Encapsulation Interface AA/T-series Non -AA Line Card 372