Cabletron Systems 9032578-05 manual SmartTRUNK Configuration Guide

Chapter 4: SmartTRUNK Configuration Guide

The following is the SmartTRUNK configuration for the SSR labeled ‘R1’ in the diagram:

smarttrunk create st.1 protocol no-protocol smarttrunk create st.2 protocol huntgroup smarttrunk create st.3 protocol huntgroup smarttrunk add ports et.1(1-2) to st.1 smarttrunk add ports et.2(1-2) to st.2 smarttrunk add ports et.3(1-2) to st.3

interface create ip to-cisco address-netmask 10.1.1.2/24 port st.1 interface create ip to-s1 address-netmask 11.1.1.2/24 port st.2 interface create ip to-s2 address-netmask 12.1.1.2/24 port st.3

The following is the SmartTRUNK configuration for the SSR labeled ‘S1’ in the diagram:

smarttrunk create st.2 protocol huntgroup smarttrunk create st.4 protocol no-protocol smarttrunk add ports et.1(1-2) to st.2 smarttrunk add ports et.2(1-2) to st.4

The following is the SmartTRUNK configuration for the SSR labeled ‘S2’ in the diagram:

smarttrunk create st.3 protocol huntgroup smarttrunk create st.5 protocol no-protocol smarttrunk add ports et.1(1-2) to st.3 smarttrunk add ports et.2(1-2) to st.5

SmartSwitch Router User Reference Manual 39