Cabletron Systems 9032578-05 Monitoring SmartTRUNKs, Specify Traffic Distribution Policy Optional

Chapter 4: SmartTRUNK Configuration Guide

To add ports to a SmartTRUNK, enter the following command in Configure mode::

Create a SmartTRUNK that will be connected to a device that supports the DEC Hunt Group control protocol.

smarttrunk add ports <port list> to <smarttrunk>

Specify Traffic Distribution Policy (Optional)

The default policy for distributing traffic across the ports in a SmartTRUNK is “round- robin,” where the SSR selects the port on a rotating basis. The other policy that can be chosen is “link-utilization,” where packets are sent to the least-used port in a SmartTRUNK. You can choose to specify the link-utilization policy for a particular SmartTRUNK, a list of SmartTRUNKs, or for all SmartTRUNKs on the SSR.

Specify traffic distribution policy.

smarttrunk set load-policy on <smarttrunk list>all-smarttrunks round-robinlink- utilization

Monitoring SmartTRUNKs

Statistics are gathered for data flowing through a SmartTRUNK and each port in the SmartTRUNK.

To display SmartTRUNK statistics, enter one of the following commands in Enable mode:.

Display information about all	smarttrunk show trunks
SmartTRUNKS and the control
protocol used.
Display statistics on traffic	smarttrunk show distribution <smarttrunk
distribution on SmartTRUNK	list>all-smarttrunks
Display information about the	smarttrunk show protocol-state <smarttrunk
control protocol on a	list>all-smarttrunks
SmartTRUNK.
Display information about the	smarttrunk show connections <smarttrunk
SmartTRUNK connection (DEC	list>all-smarttrunks
Hunt Group control protocol
connections only).

To clear statistics for SmartTRUNK ports, enter the following command in Enable mode:.

Clear load distribution statistics for SmartTRUNK ports.

smarttrunk clear load-distribution <smarttrunk list>all-smarttrunk

SmartSwitch Router User Reference Manual 37