9E312/9E423 Module Bridging

Figure 3-4. Bridge Spanning Tree Window

Configuring the Bridge Spanning Tree Window

The Bridge Spanning Tree window displays STA parameters and allows you to alter parameters for the 9E312/9E423 Module bridge as a whole, and for each individual bridging interface.

The currently selected bridging interface is highlighted in the lower right quadrant of the window. To alter the parameters of another interface, click on the appropriate Port X name listed in the quadrant.

Bridge Level Fields

Bridge Priority

This field displays the “priority” component of the 9E312/9E423 Module’s unique bridge identifier. The Spanning Tree Algorithm assigns each bridge a unique identifier, which is derived from the bridge’s MAC address and the Priority. The bridge with the lowest value of bridge identifier is selected as the Root. A lower priority number indicates a higher priority; a higher priority enhances a bridge’s chance of being selected as the Root.

You can edit this text box to change network topology, if needed. The range is 0-FFFF hexadecimal; the default value is 8000 hexadecimal.

Bridge Spanning Tree

3-13

Page 48
Image 48
Cabletron Systems 9E423, 9E312 manual Configuring the Bridge Spanning Tree Window, Bridge Level Fields, Bridge Priority