9E312/9E423 Module Bridging

3-26 Filtering Database

5. A Static filtering entry will be created in the database, which you can then
configure as necessary.
a. Specify the Type of Entry , Receive P ort, and Port Filtering action on the
new address entry as described in the previous sections.
b. Click OK to set the changes to the Filtering Database.
To delete an address:
1. Click to highlight the address entry in the Address Entry panel that you wish to
delete from the filtering database.
2. Click on Delete.
Clearing All Permanent, Static, or Dynamic Entries
To erase all Permanent, Static, or Dynamic entries from the Filtering Database,
click on the associated button at the top of the window.
Using Port Source Addressing
You can use the Port Source Addresses window to view the MAC addresses that
are communicating through a selected bridge interface.
To open the Source Addresses window from the Bridge Status window:
1. Click on the individual index ( ) of the bridge interface of interest. The port
pull-down menu will appear.
2. Select Source Addressing.... The following window, Figure 3-7, will appear.
Figure 3-7. The Port Source Addresses Window