INSTALLATION
Please take a moment to read these notes before installing your amplifier, they will enable you to get the best performance and prolong the life of the product.
The unit requires ventilation above and below. Do not situate it on a rug or other soft surface and do not obstruct the air inlet and outlet grilles on the underside and top cover. Do not place in an enclosed area such as a bookcase or in a cabinet.
This unit must not be exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit. In the event, switch off immediately, disconnect from the mains supply and contact your dealer for advice.
Ensure that small objects do not fall through any ventilation grille. If this happens, switch off immediately, disconnect from the mains supply and contact your dealer for advice.
Do not route the power cable so that it can be walked upon or damaged by other items near it.
Electronic audio components have a running in period of around a week (if used several hours per day). This will allow the new components to settle down, the sonic properties will improve over this time.
It is recommended that when
This amplifier has been designed to be left in Standby mode when not in use, this will increase the life of the amplifier (this is true with all electronic equipment). If you do not intend to use this unit for a long period of time, unplug it from the mains socket.
540A/640A Integrated amplifier
To clean the unit, wipe its case with a moist,
These units are not user serviceable, never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. A serious electric shock could result if this precautionary measure is ignored. In the event of a problem or failure, please contact your dealer.
This unit should be installed on a sturdy, level surface. Due to stray magnetic fields turntables should not be located nearby due to interference.
5