Using the Wireless Controller
Point it at the camcorder’s remote sensor when you press the buttons.
The camcorder has three remote sensors, two at the front and one at the back.
Inserting Batteries
The wireless controller operates with two AAA (R03) batteries.
1.Open the battery cover.
2.Insert the batteries following the + and
– markings.
3. Close the battery cover.
❍Camcorder and wireless controller are equipped with 2 remote sensor modes (
92). If the
wireless controller does not work, check if camcorder and wireless controller are set to the same mode.
❍When the camcorder cannot be operated with the wireless controller, or when it can only be operated in very close range, replace the batteries. Make sure to replace both batteries at the same time.
❍The wireless controller may not work properly when the remote sensor is subjected to strong light sources or direct sunlight.
22
