Installing the Backup Battery
The backup battery (lithium button battery CR2025) allows the camcorder to retain date, time (
28) and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings.
1.Open the backup battery cover.
Screw the cover to the left (use, for example, a coin).
2.Insert the backup battery with the + side facing outward.
3.Close the cover.
Align the mark on the cover with the lower mark on the camcorder and screw the cover to the right until it clicks.
q | w | e |
WARNING!
•The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100 °C or incinerate the battery.
•Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo, or with Duracell DL2025. Use of other batteries may present a risk of fire or explosion.
•The used battery should be returned to the supplier for safe disposal.
❍Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit.
❍Wipe the battery with a clean dry cloth to ensure proper contact.
❍Keep the battery out of reach of children. If it is swallowed, seek medical assistance immediately. The battery case may break, and the battery fluids may damage stomach and intestines.
❍Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.
The backup battery has a life span of about a year. “j” flashes in red to inform you that it needs to be replaced.
14
