–Sending documents from a computer and scanning documents over the network cannot be processed at the same time. If this happens, these documents are handled differently depending on the following:

•If you send PC documents when the machine is scanning documents, the machine scans documents first, then starts sending the PC documents when scanning is complete.

•If you scan documents when the machine is sending PC documents, scanning is canceled. Wait for the PC documents to be sent out, then perform the scanning operation again.

–Printing documents from a computer and scanning documents over the network cannot be processed at the same time. If this happens, these documents are handled differently depending on the following:

•If you print PC documents when the machine is scanning documents, an error may occur. In this case, the machine scans documents first, then starts printing the PC documents when scanning is complete.

•If you scan documents when the machine is printing PC documents, scanning is canceled. Wait for the PC documents to be printed out, then perform the scanning operation again.

1

Place documents.

2

Press

[SCAN] repeatedly to select

<NETWORK SCANNING>.

3

Start Network ScanGear from the

application on your computer.

For details, see “Scan,” in the e-Manual.

 

 

Basic Scanning Operations

4

Make scan settings on the [Main],

[Options], and [Scanner Info] sheets.

 

For details about the settings in each sheet, refer

 

to the Online Help for that sheet.

5

Click [Scan].

Network ScanGear Main Window closes and the

scanned image is transferred to the application. During scanning, a scanning progress dialog box is displayed. To interrupt scanning, click [Cancel].

Canceling Scan Jobs to a ComputerConnected with USB Cable

Follow the procedure below to cancel an ongoing scan job via USB.

1

Press [Stop/Reset].

2

Click [OK] on the computer screen.

Scanning

7-5