Error Codes

Error Codes

An error code is a four-digit code shown on an ERROR TX REPORT or an RX REPORT when an error occurs.

For details on reports, see “Introduction of the Machine,” in the e-Manual.

See the table below for individual error codes.

Error Code

Description

Action

 

 

 

 

 

00A0

Transmission was manually canceled on the

Resend the document if necessary.

 

 

machine.

 

 

 

 

 

 

00A1

There is a document jam.

Clear the document jam.

 

 

 

 

 

00FF

All redialing attempts have failed.

Check if the recipient’s number is correct or the

Troubleshooting

 

 

with your machine.

 

 

telephone cable is properly connected, and try

 

 

 

again.

 

0001

The sender may not be using a G3 fax machine.

Make sure the sender’s machine is compatible

 

 

 

 

 

0070

Reception was manually canceled on the

Ask the sender to resend the document if

 

 

machine.

necessary.

 

 

 

 

 

0071

The machine’s memory is full.

Print, send, or delete any documents stored in

 

 

 

memory.

 

 

 

 

 

0080

The recipient’s machine did not respond within

Resend the document. Ask the other party

 

 

35 seconds.

to check their machine. If you are making an

 

 

 

overseas call, add a pause to the number.

 

 

 

 

 

008D

The recipient’s machine has run out of paper.

Ask the recipient to make sure that paper is

 

 

 

loaded in their machine.

 

 

 

 

 

11-13