Starting the Remote UI
Starting the Remote UITo start the Remote UI, follow the procedure described below.Before you start the Remote UI, perform the following:
–Select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator. (See “Confirming IPv4 Address Settings and Checking IPv4 Connection,” or “Confirming IPv6 Address Settings,” in “Network Settings,” in the
–Set <USE HTTP> to <ON> in <SYSTEM SETTINGS>. (See “Setting the Use of HTTP,” in “Network Settings,” in the
PC a from Settings
1
2
Prepare the Network.
Set up the machine for use in a network, then connect the machine and the computer to your network router or a hub.
For details, see “Set Up Network Connection,” in the Starter Guide, or “Set Up Network Connection,” in “Set Up the Machine,” in the e- Manual.
Start the web browser.
3 | Enter the IP address of the machine in |
[Address] or [Location], then press [Enter] |
on the keyboard.
| For details on how to check the IP address, see |
| “Confirming IPv4 Address Settings and Checking |
| IPv4 Connection,” or “Confirming IPv6 Address |
| Settings,” in “Network Settings,” in the |
| The Remote UI screen appears. |
4 | Enter the required data. |
The required data differ depending on the |
authentication mode you are using.
■For default settings:
①Select [Administrator Mode] or