Overview 1 Chapter

Location and Function of Parts

w; ZEBRA switch

Set this switch to the ON position to display a zebra pattern (diagonal stripes) in the viewfinder.

Depending on the zebra setting in advanced menu page 4 (page 65), the zebra 1 for video levels between 70 to 90 IRE (or 70 to 90%) and the zebra 2 for video levels 100 IRE or more (or 100% or more) can be displayed independently or simultaneously.

wa UP/ON button

Use this button to open displays and to make “ON” settings. When using the advanced menus, use this button to change menu pages or to switch to the ordinary screen display.

ws DOWN/OFF button

Use this button to close displays and to make “OFF” settings. You can also use this button to change menu pages when using the advanced menus.

Front view

1 MIC IN +48 V connector

2 VF connector

3 MIC LOW CUT switch

4 FILTER control

5 Lens mount

6 SHUTTER switch

7 TAKE button

8 AUDIO LEVEL knob

9 WHT/BLK switch

0 VTR button

Illustration: DXC-D35WS/D35WSP

1MIC (microphone) IN +48 V connector (XLR 3- pin, female)

Connect the supplied microphone or an optional microphone (operable with a 48 V supply).

2VF (viewfinder) connector (20-pin) This is the connector for the DXF-801/801CE viewfinder.

Note

When using this connector, do not connect a DXF-41/ 51 viewfinder to the VF connector on the left side.

3MIC LOW CUT switch

Set this switch to the ON position to insert a high-pass filter in the microphone circuit, reducing wind noise. Normally leave the switch in the OFF position.

4FILTER control

Select the color temperature conversion filter appropriate to the lighting conditions. (See page 43.)

5Lens mount

Attach the zoom lens here.

16 Chapter 1 Overview