wa Voltage/error indication
The current voltage is displayed whenever the camera head’s power supply voltage dips below 11.0 V DC. However, you can also display the current voltage at any time by pressing and holding the MENU/STATUS switch in the upward position (the display is shown for as long as you hold the switch upward).
An error message is displayed when an abnormality has been detected by the auto diagnostic function (page 62).
If an error message appears, contact your Sony dealer.
If using a VTR and an Anton Bauer Intelligent Battery System
The remaining battery capacity is shown as a percentage.
ws Shutter setting indication
When the SHUTTER switch has been set to ON, the shutter speed, CLS frequency or EVS set in basic menu page 1 is displayed here.
If you set the MENU/STATUS switch to STATUS while a menu is being displayed, the camera head’s current setting status will be shown in this display area.
a)When both the DCC+ and DynaLatitude functions are set to OFF
Display | Description |
|
|
WHITE | White balance adjustment method |
| selection (PRE/A/B) and color |
| temperature during auto white |
| balance adjustment |
|
|
A.IRIS | Iris adjustment method selection |
| (STD/SPOT L/BACK L) |
|
|
FILE | STD (when not using the setup files), |
| or a selected file name (when using |
| the setup files) (see page 71). |
|
|
DCC+ or DL | For DCC+ indication: ON with the |
| OUTPUT/DL/DCC+ switch set to |
| CAM/DCC+ (DCC+ON), and OFF with |
| the switch set to CAM/DL and DL in |
| advanced menu page 2 (page 64) set |
| to OFF (both DCC+ and DynaLatitude |
| OFF). |
| For DL indication: When setting the |
| OUTPUT/DL/DCC+ switch to DL and |
| DL in advanced menu page 2 to OFF |
| (DynaLatitude OFF), LOW, STD or |
| HIGH is displayed according to DL |
| LEV setting in basic menu page 2 |
| (page 59). |
|
|
Menus and Indications Screen Viewfinder 4 Chapter
Chapter 4 Viewfinder Screen Indications and Menus 57