Fitting a VTR

2 Chapter

5 Perform the first three steps in “Fitting a VTR”.

6 Screw the connection plate (supplied with the grip for the DVCAM camcorder) which straddles the connection between the camera head and the DSR-1/1P. Also, tighten the two screws in the shoulder pad section. (See step 5 on page 26.)

Connection plate

Connections and Fitting

7 Screw the grip for the

Grip for the DVCAM camcorder

DVCAM camcorder.

 

Attaching a camcorder grip to the PVV-3/3P

1 Perform steps 2 to 4 in “Fitting a VTR”.

2 If the viewfinder is attached, adjust the viewfinder to the full-forward position.

For details, see “Adjusting the viewfinder position” on page 32.

28

Chapter 2 Fitting and Connections