6SHUTTER switch

Use this switch to set the shutter speed, CLS (clear scan), or EVS setting (see page 84). Usually, set this switch to OFF.

7TAKE button

Press this button to specify an editing point (Mark IN/ OUT or cue point) at the current tape position during shooting.

8AUDIO LEVEL knob

When the DSR-1/1P is attached, you can use this knob to manually adjust the channel 1 audio recording level.

9WHT/BLK (white/black) switch

This switch is used for automatic adjustment of the white balance and black balance. (See pages 79 to 83.)

0VTR button

Pressing this button starts and stops recording on the VTR.

Overview 1 Chapter

Left and upper view

1 Fitting for optional microphone holder

2 Accessory fitting shoe and screw hole

3 Shoulder strap fitting

4 Viewfinder fitting shoe

5 Viewfinder left-to-right positioning ring

6 Viewfinder front-to-back position locking lever 7 REMOTE connector 1

8 MONITOR OUT connector

9 VIDEO OUT connector

0 REMOTE connector 2 qa LENS connector

qs VF connector

qd VTR connector

1Fitting for optional microphone holder

You can fit an optional CAC-12 Microphone Holder here. (See page 33.)

2Accessory fitting shoe and screw hole

Attach optional video lights or other accessories here.

3Shoulder strap fixture

To use the supplied shoulder strap, fix one end here and the other end to the VTR.

4Viewfinder fitting shoe

Fix the DXF-801/801CE Viewfinder here.

5Viewfinder left-to-right position fixing ring Loosen this ring to adjust the left-to-right position of the viewfinder. (See page 32.)

6Viewfinder front-to-back position locking catch Release this catch to adjust the front-to-back position of the viewfinder. (See page 32.)

Chapter 1 Overview 17