Basic menu page 2 | Basic menu page 4 | |
|
| This menu is displayed only when an external sync |
|
| |
|
| signal is input to the camera adaptor or VTR connected |
|
| to the camera head. |
|
|
|
Item | Settings |
|
|
SKIN DTL | 0.0 (normal value) to 1.0 |
Sets the amount of | Smaller values set a softer skin detail. |
skin detail |
|
correction. |
|
|
|
DL LEV | LOW, STD (normal value), HIGH |
Sets the | Set the amount of DynaLatitude |
DynaLatitude level. | effects as high level, standard level |
| (STD), or low level. |
|
|
PRE.WHT | When the FILTER control is set to 1 |
Sets the color | (3200K): 2200 to 3200 (normal value) |
temperature of the | to 4300 |
preset white | When the FILTER control is set to 2 |
balance. | (5600K + 1/8 ND), 3 (5600K) or 4 |
| (5600K + 1/64 ND): 4600 to 5600 |
| (normal value) to 12000 |
|
|
Basic menu page 3
This is displayed when the SET UP switch has been set to FILE.
For details of this operation, see “Setup Files” (page 71).
Item | Settings |
|
|
SC PHASE | 000 (normal value) to 999 |
Sub carrier phase |
|
adjustment for |
|
when camera is |
|
genlocked.a) |
|
H PHASE | 000 to 135 (normal value) to 199 |
Horizontal phase |
|
adjustment for |
|
when camera is |
|
genlocked.a) |
|
a)This applies when using an external sync signal to synchronize operation of several cameras (see page 39).
Basic menu page 5
Menus and Indications Screen Viewfinder 4 Chapter
Chapter 4 Viewfinder Screen Indications and Menus 59