Using the Camcorder Grip

When using the camera head with a VTR as a

camcorder grip and the method for attaching it differ

camcorder, you can replace the camera head’s grip

slightly depending on the type of VTR.

with a camcorder grip (not supplied). The type of

 

Attaching a camcorder grip to the DSR-1/1P

1 If the viewfinder is attached, adjust the viewfinder to the full-forward position.

For details, see “Adjusting the viewfinder position” on page 32.

2 Remove the camera head grip’s three screws, then pull up the grip to remove it.

3 Remove the VTR connection plate.

VTR connection

plate

4 Remove the DSR-1/1P’s shoulder strap fitting and the camera head connection plate.

Camera head connection plate

Shoulder strap fitting

(continued)

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

27