Overview 1 Chapter

Location and Function of Parts

7REMOTE connector 1 (mini-jack)

Connect the RM-LG1 Remote Control Unit to enable remote operation of the ClipLink function.

8MONITOR OUT connector (BNC) Outputs both the camera video and the character information as displayed on the viewfinder screen.

You can connect an optional LCD color monitor to this connector.

9VIDEO OUT connector (BNC)

This outputs the video signal captured by the camera.

0REMOTE connector 2 (10-pin)

Connect the optional RM-M7G Remote Control Unit to this connector. Set the CAMERA HEAD SELECT switch on the bottom of RM-M7G to 1.

Note

When using the RM-M7G, note the following points.

•When operating the camera head from the camera control unit, connect the RM-M7G to the camera control unit.

•EZ mode cannot be used if the RM-M7G is connected to the camera head.

qa LENS connector (12-pin, for 2/3-inch lens)

Connect the lens connector.

qs VF (viewfinder) connector (8-pin)

This is the connector for the DXF-41/51 viewfinder.

Note

When using this connector, do not connect a DXF-801/ 801CE viewfinder to the VF connector on the front of the camera head.

qd VTR connectors (PRO 76-pin DIGITAL and PRO 50-pin)

Connect a dockable VTR. A PRO 76-pin DIGITAL connector is for the DSR-1/1P and a PRO 50-pin connector is for the PVV-3/3P or a camera adaptor.

18 Chapter 1 Overview