Using the Carrying Case

Stowing the camera

Align the camera with the base of the case, and slide the camera in forward.

Checking that the pin at the rear engages correctly, push forward until it locks into place.

Notes

•Bring the viewfinder into the horizontal position, slide it fully rearward and to the left, then fix before stowing.

•When an optional microphone (ECM-670/672, C-74, etc.) is attached, loosen the microphone fixing screws, move the microphone to the lowest position, and fix before stowing.

Align the camera with the base of the carrying case.

Base Lever

Connections and Fitting 2 Chapter

Example of fully-stowed carrying case

DXC-D35/D35P/D35WS/D35WSP Color Video Camera

This can be stored with the following system component fitted.

•CA-537/537P/327/327P/325A/325AP/325B Camera Adaptor or DSR-1/1P, PVV-3/3P or EVV-9000/9000P

•DXF-801/801CE Viewfinder

•ECM-670/ECM-672/C-74 Microphone

•Zoom lens (VCL-918BYetc.) (Largest lens which can be stowed is Canon J18 X 8.5BI-B.)

•CAC-12 Microphone Holder

•CAC-4 Chest Pad

VCT-U14 Tripod Adaptor

Fasten straps.

LC-421 Carrying Case

NP-1A/1B Battery Packs (maximum two) - Fasten straps.

Cassettes, camera cables, etc.

Chapter 2 Fitting and Connections

35