The displayed character changes each time the UP/ ON button is pressed. It changes in reverse order each time the DOWN/OFF button is pressed.
5 Return to step 2 and repeat the text entry procedure.
6 After completing text entry, move the text entry cursor to the parenthesis position.
The display changes as follows.
7 Check your cassette name/number setting, and press the UP/ON button if no more changes are required. (To make changes or to abort the procedure for this setting, return to step 2.)
This writes the new cassette name/number to the cassette memory, after which the display changes as follows.
Press the UP/ON button or DOWN/OFF button to enter the desired characters.
4
(Space)
ABCDEFGHIJKLMNOPQRSTUVWXYZ?;x/0123456789:
-.,￿
Press the MENU/STATUS switch to move the text entry arrow.
Press the MENU/STATUS switch upward to move the cursor to the right or downward to move it to the left.
The character cycles through the following sequence.
3

Basic menu pages 7 and 8

You can create a title of up to four lines, each of twelve alphanumeric or punctuation characters, and then save it. It is then possible to record the title over the picture while shooting.

Entering the title (page 7)

1 Press the MENU/STATUS switch as necessary to display basic menu page 7 (title setting display) in the viewfinder.

If a title is already present, it appears on this screen. To delete the displayed title, press the UP/ ON and DOWN/OFF buttons simultaneously.

2 Press the UP/ON button.

This brings up the cursor on the screen (flashing), and switches to title editing mode.

Initial cursor position

3 Press the DOWN/OFF button to move the cursor to the position where you wish to insert a character.

To move the cursor back

With the DOWN/OFF button held down, press the UP/ON button.

(continued)

Menus and Indications Screen Viewfinder 4 Chapter

Chapter 4 Viewfinder Screen Indications and Menus 61