Fitting a VTR

This section explains how to attach the DSR-1/1P to

When replacing the camera head grip with a camcorder

the camera head. The method for attaching a PVV-3/

grip, see “Using the Camcorder Grip” (page 27).

3P is similar.

 

1 Set the PRO 76-pin DIGITAL connector on the DSR-1/1P. (The camera connector on the PVV-3/3P is PRO 50-pin.)

For details, see the operating instructions for the DSR-1/1P.

DSR-1/1P

Camera connector (PRO 76-pin DIGITAL)

Connections and Fitting 2 Chapter

2 Loosen the two screws and remove the shoulder pad.

Screws

3 Align the projection on the bottom of the DSR-1/1P with the slot on the camera head.

 

Slot

Projection

Camera head

Groove

 

(continued)

Chapter 2 Fitting and Connections

25