Menus and Indications Screen Viewfinder 4 Chapter
Item | Settings |
MARKER | ON (normal value), OFF |
Sets MARKER display ON/OFF. MARKER is displayed | |
| when this setting is ON |
| and is not displayed |
| when it is OFF. |
| When the setting is ON, |
| go to Advanced Menu 4 |
| to select the type of |
| marker (see page 65). |
DUR TIME | 00:00 to 59:59 (minute |
Sets the recording time | to second) |
Setting the recoriding time | See “Setting the |
before shooting helps you with | recording time in |
making scenes of equal | seconds” below. |
duration. |
|
When shooting with displaying |
|
the recording time of the current |
|
cut in the viewfinder (with the |
|
REC TIME switch set to DUR), |
|
the recording time indication |
|
flashes to remind you that the |
|
recording time has passed. |
|
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the UP/ON button or DOWN/OFF button.
A value of seconds is displayed under “SS”.
Basic menu page 6
The following display is shown when the
Item | Settings |
|
|
MARK/CUE | MARK (normal value), CUE |
Selects MARK | See “Using the ClipLink Function” |
mode or CUE mode | (page 46). |
|
|
CHG REEL NO | See “To set the cassette name/ |
Sets the cassette | number” below. |
name/number |
|
|
|
To set the cassette name/number (when using
1 Connect the
2 Press the MENU/STATUS switch to move the cursor to CHG REEL NO, then press the UP/ON button.
The cursor (→) changes to the text entry arrow (↓) and the current cassette name/number is displayed. (“NO TAPE” is displayed if you neglected to load a cassette.)
Current cassette name/number
60 Chapter 4 Viewfinder Screen Indications and Menus