28

S T E P 2

Using the image in the preview window, you can define the actual area to be scanned.
Operating Procedures

Position the pointer in the preview window.

The + symbol marks the current position of the pointer.

Click the mouse button and drag the mouse in the direction you want to

define on the image as a frame.

The selected area is enclosed in a dotted frame. The area enclosed in this dotted frame
is the area that will actually be scanned.
• Clicking the mouse button outside the Selection Frame causes the selected area to
be deselected.
• Change the position of the Selection Frame by moving the pointer inside it, as it
changes into an omni-directional arrow [ ]. Clicking and dragging the cursor in
this state will cause the Selection Frame to move without changing its shape.
• Placing the mouse cursor over the dotted line of the Selection Frame causes the
cursor to change into one of four shapes [ ] [ ] [ ] [ ]. Dragging the
Selection Frame with the mouse cursor changes the shape of the Selection Frame.
• Double-clicking the mouse button anywhere in the Preview window selects the
entire image.
Hint
• To specify small areas with precision, it is convenient to expand the preview
display with the Zoom In button. See Zooming on the (P. 29).
Scan Area Settings
Selection
Frame
*Plug-inModuleCS-U3.3/1-70 8/10/99, 6:31 AM28