S T E P 3

Rotating or Reversing Images Before Scanning

An image may be rotated or reversed before scanning. As with a normal scan, Plug-in module FS automatically closes and returns to Photoshop once the scan is complete.

To Change the Orientation of an Image

Specify the Scan Area

See Aspect Ratio (p. 28).

Click on any one of the [180˚ Clockwise Rotation], [90˚ Clockwise

Rotation],

[90˚ Counterclockwise Rotation], or

[Flip] buttons.

The image will be rotated or flipped in the Preview window.

Click on the [Scan] button.

The scan will initiate.

The Plug-in module FS control panel will close and the Photoshop window will open and display the acquired image.

Hint

• If the selected Scan Area is too small (less than 64 x 64 pixels), the Scan button will not respond to a mouse click.

Even after scanning is completed, there may be occasions when the Plug-in module FS control panel does not close. You can correct this with the [Pre- view Window] command on the [Preferences] menu. (p. 31)

42

42

Page 42
Image 42
Canon FS 2710 manual Rotating or Reversing Images Before Scanning, To Change the Orientation of an Image