S T E P 2
Returns the preference settings and all other settings to the factory default settings. The table lists the major default settings.
Scan Mode ........................................................... | 24bit Color |
Magnification ...................................................... | 100% |
Histogram ............................................................ | Highlight: 255, Shadow: 0 |
Color Correction .................................................. | Gamma Value (1.4) |
Color Correction Brightness/Contrast ................... | Brightness: 0, Contrast: 0 |
Color Correction Color Balance ............................ | 0 |
Color Correction Tone Curve ................................ | Straight line |
Color Balance Threshold ...................................... | 128 |
ColorSync ............................................................ | Off |
Auto Focus ........................................................... | On |
Auto Eject ............................................................ | On |
Film Type Setting .................................................. | 35 mm Color Neg. |
Unit ..................................................................... | Pixels |
Output Device ...................................................... | File (2720 dpi) |
Preview Window .................................................. | Normal |
Driver after scanning ............................................ | Close |
Set Exposur Value and Focus Value when scanning . Enabled | |
Control Panel Position .......................................... | Center |
Click on the [Preferences] menu in the control panel and select [Resets Default Settings].
The Default Settings dialog box will appear.Click the [Yes] button to reset the default settings.33
33