CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
49
4.2. Step Movement
Execute step movement for a fixed angle.
Control Software
・Select the Step Move tab. ①
・Select an axis for step movement. ②
・Specify the displacement (angle or pulse count) for relative position (STEP) and absolute position.
③
・Press the STEP button (either positive or negative position direction can be specified) or GO
button. ③
Note: Uncheck the ④ checkbox when moving continuously. If it is checked, the stabilization time
measurement function on the next page operates, and as it takes time to display the results, moving
continuously is not possible.
①
②
③
④