z Loading Paper in the Auto Sheet Feeder
1 Flatten the four corners of the paper before loading it.
Note
zAlign the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.
zIf paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See “Paper is curled.” on page 81.
zTo avoid curling, handle paper as follows.
–Put unused paper back into the package and keep them on a level surface.
–Take out only the necessary number of sheets from the package, just before printing.
2 Prepare to load paper. | (A) (4) | (1) | ||
(1) | Open the Sheet Feeder Cover and pull out the |
|
| |
| Paper Support. |
|
| |
(2) | Open the Paper Output Tray. |
|
| |
| Put your finger on the top of the Paper Output |
|
| |
| Tray and open it gently. |
|
| |
(3) | Open the Output Tray Extension. |
|
| |
(4) | Press the Paper Feed Switch so that the Auto |
|
| |
| Sheet Feeder lamp (A) lights. |
|
| |
| Note | (3) | (2) | |
You can also select the paper source with the printer | ||||
|
| |||
driver.
For details, refer to the Printer Driver Guide
Before Printing | 17 |