Changing the Paper and Print Settings

This section describes the Settings screen that can be specified on the Operation Panel when copying, or when printing from a memory card, printed photo or film.

„Setting Items in Each Mode

Items in each mode are as follows.

When you select the item to set and press the OK button, a screen with various settings is displayed.

Note

Depending on the functions, some setting items cannot be specified in combination.

zCopy Mode

This section describes paper and print settings for Copy mode.

(1)

(2)

(3)

(4)

(5)

(6)

You can specify the paper settings for printing or print quality.

Note

Paper size, media type, and print quality settings are specified for the paper source selected by the Paper Feed Switch. Confirm the selected paper source.

(1)You can specify the reduction or enlargement method. Fit-to-page, Zoom (25 - 400%), 100%, Preset ratio

(2)You can specify the intensity.

Turn the Easy-Scroll Wheel clockwise to increase intensity or counterclockwise to decrease it. You can also use the [ or ] button to make settings.

Press the Function button (f2/Switch auto/man) in the intensity screen to automatically match the intensity to the original on the Platen Glass and then print the image. See “Function Buttons” on page 3.

The slide bar for the intensity adjustment on the LCD changes to Auto when it is done.

22Before Printing