„Error No.: 1700 Is Displayed

Cause

Action

The ink absorber is almost full.

The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example.

This error message indicates that the ink absorber is nearly full. Press the OK button to cancel the error so you can continue printing.

However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.)

„Error No.: 1851 Is Displayed

Cause

Action

Inner Cover was open when you started printing.

Close Inner Cover, press the OK button on the machine. Printing will start again.

„Error No.: 1856 Is Displayed

Cause

Action

Inner Cover was opened while printing was in progress.

Close the Inner Cover, then press the OK button on the machine.

A page of print data being sent at the time of the error will be erased, so print that page again.

„Error No.: 2001 Is Displayed

 

Cause

Action

 

No response from connected digital

Disconnect the cable connecting the machine and the device, and then

 

camera or video camcorder. /

reconnect it.

 

Connected digital camera or video

Depending on the model or brand of your device, you may have to select a

 

camcorder connected is not compatible

PictBridge-compliant print mode on the device before connecting it to the

 

with this machine.

machine. You may also have to turn on the camera or select Play mode

 

 

 

manually after connecting the device to the machine.

 

 

 

Perform necessary operations according your device’s instruction manual

 

 

 

before reconnecting it to the machine.

 

 

 

If the error is still unresolved, there is a possibility that you are using a digital

 

 

 

camera or digital video camcorder that is not supported by this machine. Use a

 

 

 

digital camera or digital video camcorder compatible with this machine.

 

 

 

 

 

 

 

 

„Error No.: 2500 Is Displayed

Cause

Action

Automatic Print Head Alignment has failed.

See “Auto head align has failed. Press OK and repeat operation. <See manual>” in “Error Message Is Displayed on the LCD” on page 72.

90Troubleshooting