6
7
Install the ink tank.
(1)Insert the front end of the ink tank into the Print Head.
(2)Press on the 
mark on the ink tank until the ink tank snaps firmly into place.
(3)Make sure that the ink lamp lights up red.
Important
The machine cannot be used unless all the ink tanks are installed.
Close the Inner Cover.
Note
Make sure that the Inner Cover is closed. Printing will not start with the Inner Cover open since paper can not be fed properly.
*1
(1)
(3) (2)
*1 Make sure the position of the tank matches the label.
8
Gently close the Scanning Unit (Printer Cover).
Caution
zBe sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to get your fingers caught.
zDo not hold the LCD or the Operation Panel.
Note
zIf the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see “Error Message Is Displayed on the LCD” on page 72.
zWhen you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes.
54Routine Maintenance