zMemory Card, Easy Photo Reprint, and Film Print Modes

This section describes the paper and print settings for Memory card, Easy photo reprint, and Film print modes.

Print Settings Confirmation Screen

You can specify the paper settings for printing or print quality.

Note

Paper size, media type, and print quality settings are specified for the paper source selected by the Paper Feed Switch. Confirm the selected paper source.

Example: Screens displayed in Select and print in the Memory card mode, the Easy photo reprint mode, or the Film print mode

See “Printing Photographs Stored on a Memory Card” on page 34 or “Printing Scanned Photographs” on page 41.

(1)

(2)

(3)

(4)

(1)Select the paper source.

Before printing, confirm that the location where you have loaded paper is selected as the paper source. Press the OK button to change the paper source.

(2)Select the page size.

Credit card, A4, 8.5" x 11" (215 x 279), 8" x 10" (203.2 x 254.0)*, 5" x 7" (127 x 177.8), 4" x 6" (101.6 x 152.4), Wide 4" x 7.1" (101 x 180)

Important

Credit card can be selected when the Auto Sheet Feeder is selected as the paper source.

Note

Some of these options are not available depending on the country of purchase.

(3)Select the media type.

Glossy Photo Paper, Matte Photo Paper, Photo Plus Glossy, Plain paper*, Photo Paper Pro

(4)Select the print quality. Standard, High(quality-priority)

* Can be selected only in Memory card mode.

24Before Printing