Cause

Action

 

Printing on inappropriate type of paper.

z Check to see if the paper you are printing on is not too thick or curled.

 

See “Media Types You Cannot Use” on page 10.

 

z When performing Borderless Printing, print quality may be reduced at the top

 

and bottom edges of the paper. Make sure that the paper you are using is

 

suitable for Borderless Printing.

 

 

For details, refer to the Printer Driver Guide on-screen manual.

Paper is curled.

If you are using paper with either any of the corners or the whole printing

 

surface curled, the paper may become dirty, not feed properly, or both. Use such

 

paper after correcting paper curl as follows.

 

 

(1)With the printing side (A) facing up, cover the paper with a fresh sheet of

 

plain paper to avoid staining or scratching the surface.

 

(2)Roll up the paper in a direction opposite to paper curl as seen below.

 

(1)

(2)

(A)

(3)Check to see that the paper curl is corrected to within approximately 0.08 to 0.2 inches / 2 to 5 mm (B) in height.

(A)

 

 

 

 

 

(B)

 

 

 

 

 

We recommend printing curl-corrected paper one sheet at a time.

Printing on thick paper.

Selecting the Prevent paper abrasion setting will widen the clearance between

 

the Print Head and the loaded paper. If you notice abrasion even with the media

 

type set correctly to match the loaded paper, set the machine to prevent paper

 

abrasion.

 

* Clear the Prevent paper abrasion check box once printing is complete, and

 

then click Send.

 

 

 

 

 

 

 

 

 

 

 

 

Open the printer properties dialog box, and in Custom Settings in the

 

Maintenance sheet, select the Prevent paper abrasion check box, and then

 

click Send.

 

 

 

 

 

 

 

 

 

 

In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu,

 

select the Prevent paper abrasion check box, and then click Send.

 

To open the printer properties dialog box (Windows), refer to “Opening the

 

Printer Properties Dialog Box (Windows)” in the User’s Guide on-screen

 

manual.

 

To open the Canon IJ Printer Utility (Macintosh®), refer to “Opening the Canon

 

IJ Printer Utility (Macintosh)” in the User’s Guide on-screen manual.

 

When Prevent paper abrasion is selected, the setting is also applied to direct

 

printing from a digital camera.

 

When performing copy direct printing without using a computer, select Print

 

settings, set Prevent paper abrasion to ON. For details on settings, refer to

 

“Changing the Machine Settings” in the User’s Guide on-screen manual.

Troubleshooting 81