Canon S400 manual Connecting to a Bubble Jet Printer, Ring, Attach tile direct interface cable to

ring 1103

_	_.__	printer.
		• Attach tile direct interface cable to the

insert the cable'sconnector into the camera'sDIGITALterminal. Orient the

1#_• Opencable sothethatcamera'sterminalthe connector'scover, and symbol faces the camera'sback panel.

Direct Interface

Cable (DIF-100)

•Pressthe printer'sON/OFF button to turn on its power. (If you are using Card Photo Printer CP-10, the printer'spower will turn on in Step 2 when printer and power cable are connected.)

•Set the mode switch to the F_I position and turn on the camera'spower.

•[] will display when the printer is correctly connected.

1

This shows when a direct print function compatible printer is connected.

Connecting to a Bubble Jet Printer

Please read the Quick Start Guide supplied with your Bubble Jet printer to see if it is compatible with the camera'sdirect print function, and for instructions regarding the connection cables and the printer's general operation.

Shut the camera's power off (p. 26).