104I P_._.g

To the BJ Printer

interface Cable

1

This shows when

a BJ printer is connected.

Turn the Bubble Jet printer'spower on after you have connected the power cord to the Bubble Jet printer and inserted the other end in a power outlet.

Attach the interface cable to the Bubble

Jet printer.

Open the camera'sterminal cover and insert the cable'sconnector into the camera'sDIGITALterminal. Orient the cable so that the word Canon on the connector faces the camera'sfront panel.

Set the mode switch to the F_I position and turn on the camera'spower.

[] will display when the printer is correctly connected.

printed through the operation panel while the camera is connected.

The following cannot be conducted while the printer is connected.

-Playing movies

-Setting the language with the SETand the MENU button combination.

When the printer is disconnected, the [] or [] symbol will disappear from the LCD monitor and the camera will revert to the standard replay mode.

Use the following procedures to datach the cable from the camera and printer.

I. Detach the cable from the printer.

2.Shut off the camera's power.

3.Detach the cable from the camera.

Ensure that you grip the connector's sides when you detach the cable from the camera's DIGITAL terminal.

Page 106
Image 106
Canon S400 manual