Low Reference specifies Low Point of the Outdoor IAQ Sensor Range in ppm.
Low Reference: Units: | PPM (parts per million) |
Range: | 0 to 5000 |
Default Value: | 0 |
High Reference specifies High Point of the Outdoor IAQ Sensor Range in ppm.
High Reference: Units: | PPM (parts per million) |
Range: | 0 to 5000 |
Default Value: | 2000 |
OUTDOOR AIR QUALITY LOCKOUT POINT — When set to
Outdoor Air |
|
|
Quality Lockout |
|
|
Point: | Range: | 0 to 5000 |
| Default Value: | 0 |
SERVICE PASSWORD — The Service Password function defines the password needed to access the controller via the Navigator interface.
Service Password: Range: | 0000 to 9999 |
Default Value: | 1111 |
PASSWORD ENABLE — The Password Enable function is used to require a password to be entered when attempting to access the controller via the Navigator™ display module interface.
Password
Enable: Range: Enable/Disable Default Value: Disable
METRIC DISPLAY — The Metric Display function is used to toggle the display for the Navigator between US and Metric units.
Metric Display: Range: | On/Off |
Default Value: | Off |
Occupancy Maintenance Screen — The Occupan- cy Maintenance screen is used to check the occupied schedule. Information concerning the current occupied period is dis- played. See Table 16.
MODE — The Mode point displays the current occupied mode for the controller. If the controller is following its own local schedule this is the result of the local schedule status. If the controller is configured to follow a global schedule, this point displays the mode last received from a global schedule broadcast.
Mode: | Display Range: | 0 to 1 |
| Default Value: | 0 |
| Network Access: | None |
CURRENT OCCUPIED PERIOD — If the controller is con- figured to determine occupancy locally, the Current Occupied Period point is used to display the current period determining occupancy.
Current Occupied
Period: Display Range: 1 to 8 Default Value: 0 Network Access: None
OVERRIDE IN PROGRESS — The Override in Progress point is used to display if an occupancy override is in progress. The point will display “Yes” if an override is in progress, or “No” if there is no override.
Override In
Progress: Display Range: Yes/No Default Value: No Network Access: None
OVERRIDE DURATION — The Override Duration point displays the number of minutes remaining for an occupancy override which is in effect. If the override duration value down- loaded is in hours, the value will be converted to minutes. If the occupancy schedule is occupied when override is initiated, the current occupancy period will be extended by the number of hours/minutes requested.
If the current occupancy period is unoccupied when the oc- cupancy override is initiated, the mode will change to occupied for the duration of the number of hours/minutes downloaded. If the occupancy override is due to end after the start of the next occupancy period, the mode will transition from occupancy override to occupied without becoming unoccupied, and the occupancy override timer will be reset.
Override
Duration: Display Units: Minutes Display Range: 0 to 240 Default Value: 0 Network Access: None
OCCUPIED START TIME — The Occupied Start Time point shows the time that the current occupied mode began. If the current mode is unoccupied or the controller is following a global schedule, the value displayed by this point will remain at default.
Occupied |
|
|
Start Time: | Display Range: | 00:00 to 24:00 |
| Default Value: | 00:00 |
| Network Access: | None |
UNOCCUPIED START TIME — The Unoccupied Start Time point shows the time that the current occupied mode will end. This will also be the beginning of the next unoccupied mode. If the current mode is unoccupied or the controller is following a global schedule, the value displayed by this point will remain at default.
Unoccupied |
|
|
Start Time: | Display Range: | 00:00 to 24:00 |
| Default Value: | 00:00 |
| Network Access: | None |
NEXT OCCUPIED DAY — The Next Occupied Day point displays the day of week when the next occupied period will begin. This point is used with the Next Occupied Time so the user will know when the next occupied period will occur. If the controller is following a global schedule this point will remain at default.
Next Occupied |
|
|
Day: | Display Range: | MON, TUE, WED, |
|
| THU, FRI, SAT, SUN |
| Default Value: | No display (Blank) |
| Network Access: | None |
NEXT OCCUPIED TIME — The Next Occupied Time point displays the time day when the next occupied period will begin. This point is used with the Next Occupied Day so the user will know when the next occupied period will occur. If the PremierLink™ controller is following a global schedule this point will remain at default.
Next Occupied
Time: Display Range: 00:00 to 24:00 Default Value: 00:00 Network Access: None
39
