The Average Occupied Heat Set Point displays the Occupied Heat set point from the Linkage Thermostat.
Average Occupied |
|
Heat Set Point: Display Units: | Degrees F (Degrees C) |
Display Range: | 0.0 to 99.9 |
Default Value: | 0.0 |
Network Access: | None |
The Average Occupied Cool Set Point displays the Occu- pied Cool set point from the Linkage Thermostat.
Average Occupied |
|
Cool Set Point: Display Units: | Degrees F (Degrees C) |
Display Range: | 0.0 to 99.9 |
Default Value: | 0.0 |
Network Access: | None |
The Average Unoccupied Heat Set Point displays the Unoc- cupied heat set point from the Linkage Thermostat.
Average Unoccupied
Heat Set Point: Display Units: Degrees F (Degrees C) Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Unoccupied Cool Set Point displays the Unoc- cupied cool set point from the Linkage Thermostat.
Average Unoccupied
Cool Set Point: Display Units: Degrees F (Degrees C) Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Zone Temperature displays the space tempera- ture from the Linkage Thermostat.
Average Zone |
|
|
Temperature: | Display Units: | Degrees F (Degrees C) |
| Display Range: | 0.0 to 99.9 |
| Default Value: | 0.0 |
| Network Access: | None |
The Average Occupied Zone Temperature displays the space temperature from the Linkage Thermostat during occu- pied periods.
Average Occupied
Zone Temperature: Display Units: Degrees F (Degrees C) Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Occupancy Status point displays a 1 if occupancy is re- ported by the Linkage Thermostat. The Occupancy Status point displays a 0 if occupancy is not reported by the Linkage Thermostat.
Occupancy
Status:Display Range: 0, 1 Default Value: 0 Network Access: None
Table 17 — Maintenance
DESCRIPTION | VALUE | UNITS | STATUS | FORCE | NAME |
Thermostat Control | No |
|
|
| TSTAT |
Occupied | Yes |
|
|
| OCCUP |
Timed Override in Effect | No |
|
|
| TIMOV |
Start Bias Time | 0 | min |
|
| STRTBIAS |
Heat | No |
|
|
| HEAT |
Cool | No |
|
|
| COOL |
IAQ Control | No |
|
|
| IAQCL |
Demand Limit | No |
|
|
| DEMLT |
Temp Compensated Start | No |
|
|
| TCSTR |
IAQ | No |
|
|
| IQPRG |
Unoccupied Free Cool | No |
|
|
| NTFCL |
Fire Shutdown | No |
|
|
| FIRES |
Linkage Control | No |
|
|
| DAVCL |
Field/Startup Test | No |
|
|
| FIELD |
Heat Submaster Ref | 40.0 | dF |
|
| SHSR |
Cool Submaster Ref | 150.0 | dF |
|
| CCSR |
Economizer Submaster Ref | 120.0 | dF |
|
| ECONSR |
Economizer Submastr Gain | 0.00 |
|
|
| ECONGN |
Compressor Starts | 0.00 |
|
|
| CMPST |
Compressor 1 Runtime | 0.00 | HOURS |
|
| CM1RT |
Compressor 2 Runtime | 0.00 | HOURS |
|
| CM2RT |
Supply Fan Runtime | 17.00 | HOURS |
|
| FANRT |
Linkage Thermostat |
|
|
|
|
|
Linkage Status | 2 |
|
|
| LINKSTAT |
Supervisory Element | 0 |
|
|
| |
Supervisory Bus | 0 |
|
|
| |
Supervisory Block | 0 |
|
|
| BLOCKNUM |
Average Occ Heat Setpt | 0.0 | dF |
|
| OCLOSTPT |
Average Occ Cool Setpt | 0.0 | dF |
|
| OCHISTPT |
Average Unoc Heat Setpt | 0.0 | dF |
|
| UNLOSTPT |
Average Unoc Cool Setpt | 0.0 | dF |
|
| UNHISTPT |
Average Zone Temp | 0.0 | dF |
|
| AZT |
Average Occ Zone Temp | 0.0 | dF |
|
| AOZT |
Occupancy Status(1=occ) | 1 |
|
|
| OCCSTAT |
NOTE: Bold values indicate points that can be forced through communications.
42
