Carrier 48/50HJ004-014 specifications 47.9

Table 1D — Electrical Data (COBRA™ Energy Recovery 50HJ004-007 Units with 62AQ100) (cont)

					HEATER	HEAT		POWER SUPPLY				SINGLE	DISCONNECT SIZE*
UNIT	NOMINAL	IFM	CONV	62AQ	CRHEATER				FUSE OR			POINT BOX
	V-PH-Hz	TYPE	OUTLET	FLA		FLA	MCA			MOCP		CRSINGLE	FLA		LRA
					---A00				HACR BKR
												---A00
					NONE	—	24.9		30	—		—	28		119
					006	7.2	24.9		30	—		—	28		119
		STD	YES	15.1	008	13.8	30.9		35	—		025	28		119
					009	16.8	34.6		40	—		025	36		119
					008+008	27.7	48.1		50	—		025	48		119
					008+009	30.7	51.9		60	—		025	52		119
					NONE	—	23.0		30	—		—	24		123
50HJ006					006	7.2	23.0		30	—		—	24		124
	460-3-60	HIGH STATIC	NO	15.1	008	13.8	29.6		35	—		025	24		124
(cont)					009	16.8	33.3		35	—		025	32		124
					008+008	27.7	46.8		50	—		025	44		124
					008+009	30.7	50.6		60	—		025	48		124
					NONE	—	25.7		30	—		—	29		128
					006	7.2	25.7		30	—		—	29		129
		HIGH STATIC	YES	15.1	008	13.8	31.7		35	—		025	29		129
					009	16.8	35.4		40	—		025	37		129
					008+008	27.7	48.9		50	—		025	49		129
					008+009	30.7	52.7		60	—		025	53		129
					NONE	—/—	47.9/ 47.9		60/60	—		—	49/ 49		260/260
					002	13.6/15.6	47.9/	47.9	60/60	—		—	49/	49	260/260
		STD	NO	15.1	004	21.9/25.3	50.9/	55.1	60/60	—		—	49/	53	260/260
					005	33.4/38.5	65.2/	71.6	—	70/	80	002	62/	68	260/260
					004+004	43.8/50.5	78.2/	86.7	—	80/	90	003	74/	82	260/260
					004+005	55.2/63.8	92.6/103.2		—	100/110		003	88/	97	260/260
					NONE	—/—	53.9/ 53.9		60/60	—		—	55/ 55		265/265
					002	13.6/15.6	53.9/	53.9	60/60	—		—	55/	55	265/265
		STD	YES	15.1	004	21.9/25.3	55.7/	59.3	—	70/	70	002	55/	58	265/265
					005	33.4/38.5	70.0/	75.8	—	80/	80	003	68/	73	265/265
					004+004	43.8/50.5	83.0/	90.9	—	90/100		003	80/	87	265/265
	208/230-3-60				004+005	55.2/63.8	97.4/107.4		—	100/110		003	93/102		265/265
					NONE	—/—	49.6/ 49.6		60/60	—		—	51/ 51		279/279
					002	13.6/15.6	49.6/	49.6	60/60	—		—	51/	51	279/279
		HIGH STATIC	NO	15.1	004	21.9/25.3	52.6/	56.8	—	60/	70	002	51/	55	279/279
					005	33.4/38.5	66.9/	73.3	—	70/	80	002	64/	70	279/279
					004+004	43.8/50.5	79.9/	88.4	—	80/	90	003	76/	84	279/279
					004+005	55.2/63.8	94.3/104.9		—	100/110		003	90/	99	279/279
					NONE	—/—	55.6/ 55.6		60/60	—		—	57/ 57		284/284
					002	13.6/15.6	55.6/	55.6	60/60	—		—	57/	57	284/284
		HIGH STATIC	YES	15.1	004	21.9/25.3	57.4/	61.0	—	70/	70	002	57/	60	284/284
					005	33.4/38.5	71.7/	77.5	—	80/	80	003	70/	75	284/284
					004+004	43.8/50.5	84.7/	92.6	—	90/100		003	82/	89	284/284
50HJ007					004+005	55.2/63.8	99.1/109.1		—	100/110		003	95/104		284/284
					NONE	—	22.8		30	—		—	23		127
					006	7.2	22.8		30	—		—	23		127
		STD	NO	15.1	008	13.8	28.8		35	—		025	23		127
					009	16.8	32.5		35	—		025	31		127
					008+008	27.7	46.0		50	—		025	43		127
					008+009	30.7	49.8		50	—		025	47		127
					NONE	—	25.5		30	—		—	29		131
					006	7.2	25.5		30	—		—	29		132
		STD	YES	15.1	008	13.8	30.9		35	—		025	29		132
					009	16.8	34.6		40	—		025	36		132
					008+008	27.7	48.1		50	—		025	48		132
	460-3-60				008+009	30.7	51.9		60	—		025	52		132
					NONE	—	23.6		30	—		—	24		136
					006	7.2	23.6		30	—		—	24		137
		HIGH STATIC	NO	15.1	008	13.8	29.6		35	—		025	24		137
					009	16.8	33.3		35	—		025	32		137
					008+008	27.7	46.8		50	—		025	44		137
					008+009	30.7	50.6		60	—		025	48		137
					NONE	—	26.3		30	—		—	30		141
					006	7.2	26.3		30	—		—	30		141
		HIGH STATIC	YES	15.1	008	13.8	31.7		35	—		025	30		141
					009	16.8	35.4		40	—		025	37		141
					008+008	27.7	48.9		50	—		025	49		141
					008+009	30.7	52.7		60	—		025	53		141

	LEGEND
FLA	— Full Load Amps
HACR	— Heating, Air Conditioning and Refrigeration
IFM	— Indoor (Evaporator) Fan Motor
LRA	— Locked Rotor Amps
MCA	— Minimum Circuit Amps
MOCP — Maximum Overcurrent Protection
NEC	— National Electrical Code
UL	— Underwriters’ Laboratories

*Used to determine minimum disconnect per NEC.

†Single point box CRSINGLE017A00 is part of base unit.

NOTES:

1.In compliance with NEC requirements for multimotor and combination load equipment (refer to NEC Articles 430 and 440), the overcurrent protective device for the unit shall be fuse or HACR breaker. UL, Canada units may be fuse or cir- cuit breaker.

2.Unbalanced 3-Phase Supply Voltage

Never operate a motor where a phase imbalance in supply voltage is greater than 2%. Use the following formula to determine the percent of voltage imbalance.

max voltage deviation from average voltage

= 100 x

average voltage

Example: Supply voltage is 460-3-60.

AB = 452 v

BC = 464 v

AC = 455 v

452 + 464 + 455

Average Voltage =

3

1371

=

3

=457

Determine maximum deviation from average voltage. (AB) 457 – 452 = 5 v

(BC) 464 – 457 = 7 v (AC) 457 – 455 = 2 v Maximum deviation is 7 v.

Determine percent of voltage imbalance.

% Voltage Imbalance = 100 x	7
	457
= 1.53%

This amount of phase imbalance is satisfactory as it is below the maximum allow- able 2%.

IMPORTANT: If the supply voltage phase imbalance is more than 2%, contact your local electric utility company immediately.

20