Carrier 48SS018-060, 48SX024-060 user manual 48SX024-036 Without Base Rail, Unit Dimensions

REQ'D CLEARANCES FOR SERVICING. in. (mm)

Duct panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

Unit top . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 (914)

Side opposite ducts	. .	. 36	(914)
Compressor access	. .	. 36	(914)
(Except for NEC requirements)
REQ'D CLEARANCES TO COMBUSTIBLE MAT'L. in. (mm)

Maximum extension of overhangs . . . . . . . . . . . . . . . 48 (1219)

Unit top . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 (356)

Duct side of unit . . . . . . . . . . . . . . . . . . . . . . . . 2 (51)

Side opposite ducts	. . . . . . 14 (356)
Bottom of unit	. .	. .	. . . . . 0
Flue panel	. .	. .	. . 36 (914)
NEC REQ'D CLEARANCES. in. (mm)
Between units, control box side	. . . . . 42 (1067)
Unit and ungrounded surfaces, control box side . . .	. .	. .	. . 36 (914)
Unit and block or concrete walls and other grounded
surfaces, control box side	. .	. .	. 42 (1067)

	ELECTRICAL	UNIT WEIGHT			CORNER WEIGHT
UNIT					(lb/kg)
	CHARACTERISTICS
		lb	kg	A	B	C	D
48SX024040	208/230-1-60	333	151	104/47	50/23	130/59	49/22
48SX024060	208/230-1-60	345	157	107/49	53/24	133/60	52/24
48SX030040	208/230-1-60	336	153	97/44	66/30	118/54	55/25
48SX030060/080	208/230-1-60	348	158	100/45	69/31	121/55	58/26
48SX036060/080	208/230-1-60, 208/230-3-60, 460-3-60	366	166	94/43	84/38	117/53	71/32
48SX036100/120	208/230-1-60, 208/230-3-60, 460-3-60	378	172	97/44	87/40	120/55	74/34

UNIT	CENTER OF GRAVITY (in./mm)
	X	Y	Z
48SX024040	26.71/678	20.06/510	12.65/321
48SX024060	26.64/677	20.12/511	12.65/321
48SX030040	27.06/687	21.05/535	12.65/321
48SX030060/080	26.98/685	21.07/535	12.65/321
48SX036060/080	27.14/689	21.10/536	12.65/321
48SX036100/120	27.06/687	21.12/536	12.65/321

		LEGEND
CG	Ð	Center of Gravity	MAT'L	Ð	Material
COND	Ð Condenser		NEC	Ð National Electrical Code
LV	Ð	Low Voltage	REQ'D	Ð	Required

NOTES:

1.Clearances must be maintained to prevent recirculation of air from outdoor- fan discharge.

2.Adequate clearance around air openings into combustion chamber must be provided.

Fig. 6 Ð 48SX024-036 Without Base Rail, Unit Dimensions

6