Using the Function Menu

 

 

 

 

 

4. Use the R-17 (t, y) buttons to select the

AutoResume (Auto Resume)

 

operation you want.

 

Specifies whether the Digital Keyboard should remember its

 

 

 

 

 

 

setup when turned off and restore it the next time it is turned

 

 

To do this:

Move the 0 here:

on.

 

Return the power on default settings

Clear

oFF* : Restores power on defaults when power is turned on.

 

 

to the factory default settings (clearing

 

on : Remembers setup when power is turned off and

 

 

 

default settings).

 

 

 

restores it when power is turned back on.

 

 

 

 

 

 

 

 

 

 

 

 

 

Rewrite the power on default settings

Store

 

 

 

 

 

with the Digital Keyboard’s current

 

 

 

 

 

 

 

 

 

 

 

setup (registering default settings).

 

 

 

 

 

 

 

•

For information about the setting items that are restored

 

 

 

 

 

 

 

when Auto Resume is enabled, see “Parameter List” (page

 

• For information about the setting items that are

 

 

E-127).

 

registered as default settings, see “Parameter List”

•

Initially, power on default settings are the same as the

 

(page E-127).

 

 

 

factory default settings. You also can use the procedure

 

5. After everything is the way you want, press the

 

 

below to specify other power on default settings to suit your

 

 

 

needs.

 

R-16 (ENTER) button.

 

 

 

 

 

 

• The message “Complete” appears and the display

Default (Default Settings)

 

 

returns to the screen before you pressed the R-16

You can use this setting item to do the following.

 

(ENTER) button in step 3.

 

 

 

 

 

•

Rewrite the power on default settings with the Digital

 

6. To exit the function menu, press the R-13

 

 

Keyboard’s current setup (registering default settings).

 

 

 

 

(FUNCTION) button.

 

•

Return the power on default settings to the factory default

 

 

 

 

settings (clearing default settings).

 

 

 

 

■ To register or clear default settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If you want the default settings to be restored whenever

 

 

 

 

 

1. Press the R-13 (FUNCTION) button to display

 

power is turned on, select “oFF” for the “AutoResume”

 

setting (page E-100).

 

 

 

the function menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Use the R-17 (i, y) buttons to move the 0to

 

Initialize (Initialize)

 

 

This item can be used to initialize all data and settings, or

 

 

“General” and then press the R-16 (ENTER)

 

 

 

button.

 

parameter settings only.

 

 

 

 

 

 

 

3. Use the R-17 (t, y) button to move the 0to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• For information about what settings are initialized when

 

 

“Default” and then press the R-16 (ENTER)

 

 

 

 

“Parameter” is selected for initialization in step 4 of the

 

 

button.

 

 

 

 

procedure below, see “Parameter List” (page E-127).

 

 

 

 

 

•This displays the default setting screen like the one shown below.

E-100