Music Presets

 

To perform menu operations

*1 Deletes all existing chords, and replaces it with four

 

 

 

measures of data with a C-chord at the first beat of the first

1. Perform steps 1 through 4 of the procedure

measure (user preset initial data).

 

under “Chord Progression Editing Flow” on

*2 You will not be able to execute this operation if the number

 

page E-58.

of measures specified exceeds 999.

2. While holding down the R-13 (FUNCTION)

*3 You cannot delete all measures. If you specify range that

includes all of the measures, the first measure will remain

 

button, press the C-13 (MENU) button.

without being deleted.

 

5. In response to the “Sure?” message that

3. This displays a screen like the one shown

appears, press the R-14 (YES) button to execute

 

below.

 

the operation you performed in step 4 or the

 

 

 

 

R-14 (NO) button to cancel.

 

 

• Pressing the R-14 (YES) button starts the process. The

 

 

message “Please Wait” will remain on the display if the

 

 

process takes time to perform. Do not perform any

 

 

operation while this message is on the display.

4.Execute the desired menu operation.

To do this:

 

Do this:

Delete all existing

Use the R-17 (t, y) buttons to move the 0

chords

to “Initialize” and then press the R-16

(Initialize)*1

(ENTER) button.

Key shift all existing

1.

Use the R-17 (t, y) buttons to move the

chords

 

0 to “Key Shift” and then press the R-16

(Key Shift)

 

(ENTER) button.

 

2.

Use the dial or R-14(–, +) buttons to

 

 

specify how much you want to shift the key.

 

 

• You can specify a value from –5 to +6.

 

3.

Press the R-16 (ENTER) button.

 

 

 

Insert another music

1.

Use the R-17 (t, y) buttons to move the

preset chord

 

0 to “Append Chord” and then press the

progression

 

R-16 (ENTER) button.

following the chord

2.

Use the dial or R-14(–, +) buttons to scroll

progression data of

 

through the music preset numbers until the

the preset being

 

one you want is displayed, and then press

edited

 

the R-16 (ENTER) button.

(Append Chord)*2

 

 

Delete existing

1.

Use the R-17 (t, y) buttons to move the

chords in a specific

 

0 to “DeleteMeas.” and then press the

measure

 

R-16 (ENTER) button.

(Delete Measure)*3

2.

Use the dial or R-14(–, +) buttons to

 

 

specify the start measure of the delete

 

 

operation.

 

3.

Press the R-17 (y) button to move the

 

 

thick brackets (%) to “Size”.

 

4.

Use the dial or R-14(–, +) buttons to

 

 

specify the number of measures you want

 

 

to delete.

 

5.

After everything is the way you want, press

 

 

the R-16 (ENTER) button.

 

 

 

Insert blank

1.

Use the R-17 (t, y) buttons to move the

measures at a

 

0 to “InsertMeas.” and then press the

specific location

 

R-16 (ENTER) button.

(Insert Measure)*2

2.

Use the dial or R-14(–, +) buttons to

 

 

specify the start measure of the insert

 

 

operation.

 

3.

Press the R-17 (y) button to move the

 

 

thick brackets (%) to “Size”.

 

4.

Use the dial or R-14(–, +) buttons to

 

 

specify the number of measures you want

 

 

to insert.

 

5.

After everything is the way you want, press

 

 

the R-16 (ENTER) button.

 

 

 

E-61