Using a Memory Card
Loading Data from a Memory Card
•Make sure that all of the data you want to load is in the MUSICDAT folder on the memory card.
To load data to Digital Keyboard memory from a memory card
1.Insert the memory card into the card slot.
2.If the Digital Keyboard is in the card mode, press the
3.Referring to the table in step 3 of the procedure under “To save Digital Keyboard data to a memory card” (page
•All setup registration banks are loaded as a batch. Other data is loaded in area (data item) units.
4.While holding down the
•This causes an “Xxxx Load”* screen like the one shown below to appear. The sample screen below shows the screen that appears from the rhythm screen.
5.Use the dial or
6.Press the
7.In response to the “Sure?” message that appears, press the
*The “Xxxx” part of the file name depends the type of data on the memory card.
To batch load all Digital Keyboard memory data from a memory card
1.Press the
2.While holding down the
•This displays the function menu “Play/CardUtl” screen.
3.Use the
•This displays the “All Load” screen.
•The remainder of the steps are the same as those from step 5 under “To load data to Digital Keyboard memory from a memory card”.