Casio CTK6000, MA1007-A, WK6500E1A Editing a Song

					Using the Song Sequencer
7. To stop playback, press the L-17 (START/STOP)
					Editing a Song
		button.
			The following operations are supported during song editing.
			•		Deleting a specific song or all songs
			•		Copying a song from one area to another
•	Pressing the R-15 (EXIT) button without pressing the R-16
	(ENTER) button in step 4 above will cancel the phrase		•		Deleting specific measures from a song
	setting operation and close the locator screen.		•		Inserting blank measures into a song
			•		Extracting system track recorded content to track 04
•	The start point and end point specified on the locator
					through 07 or 09 through 16
	screen by the above operation will be displayed as the
			• Renaming songs
	initial default values when you display the screen of editing
	the next event.			To start a song editor operation
	–	“To delete all events in a specific range of a track” (page
		E-87)	1. Press the C-3 (SONG SEQUENCER) button to
	– “To copy the events within a specific range to a desired
		location” (page E-88)			enter the song sequencer mode.
	–	“To quantize all note events within specific range of a	2. While holding down the R-13 (FUNCTION)
		track” (page E-90)
	–	“To delete all pitch bender events within a specific range			button, press the C-3 (EDIT) button to display
		of a track” (page E-91)
					the editor menu.
	This lets you repeat play and check the phrase so you can
	perform the above operation to edit it.

3. Use the R-17 (y) button to move the 0 to “Song Edit” and then press the R-16 (ENTER) button.

• This displays the song editor menu shown below.

E-75