Applying Effects to a Sound

 

To add the chorus effect to sounds

8. Use the mixer to adjust the chorus send of the

 

 

 

 

part to which you want to apply chorus.

 

 

 

 

 

 

 

 

 

1. While holding down the R-13 (FUNCTION)

 

 

 

 

• You can use “Cho.Send” (Part Chorus Send, page

 

button, press the C-5 (EFFECT) button to

 

 

 

E-44) to adjust how chorus is applied to the tone of

 

display the effect setting screen.

 

 

 

each keyboard or Auto Accompaniment part. The initial

 

 

 

 

 

 

 

 

 

 

default setting is 0 for the chorus send of all parts, so

 

 

 

 

 

 

 

 

 

 

change the settings to a chorus send value greater than

 

 

 

 

 

 

 

 

 

 

0 for all parts to which you want to apply the chorus

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

effect. For details, see “Using the Mixer” (page E-39).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Selecting a tone with DSP causes the “Chorus/DSP”

 

 

 

 

 

 

 

 

 

setting to change automatically to the “DSP” (DSP

 

 

 

 

 

 

 

 

 

effect mode), so the chorus effect will not be available.

 

 

 

 

 

 

 

 

 

If you want the chorus effect always to be available,

 

 

 

 

 

 

 

 

 

change the “DSP Disable” setting to “on”. This will

 

 

 

 

 

 

 

 

 

keep the Digital Keyboard in the chorus effect mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• A pointer indicator is displayed next to CHORUS when

 

 

 

 

 

 

 

 

 

“Chorus” is selected for the “Chorus/DSP” setting. The

2. If you want, use the R-17 (t, y) buttons to

 

 

pointer indicator is not displayed next to CHORUS when

 

 

“oFF” is selected for the chorus type or when “DSP” is

 

move the thick brackets (%) to the “DSP

 

 

selected for the “Chorus/DSP” setting.

 

Disable”setting, and then use the R-14 (–, +)

•

Selecting “Chorus” for the “Chorus/DSP” setting will cause

 

 

 

the “DSP Line” (Part DSP Line, page E-44) setting for all

 

buttons to change the setting to “on”.

 

 

 

 

 

parts to be changed to “oFF”.

 

 

 

 

 

 

 

 

 

•For more information about this setting, see the “Important!” note below.

•If you turning on the “DSP Disable” setting, you should skip steps 3 and 4 below.

3.Use the R-17 (t, y) buttons to move the thick brackets (%) to the “Chorus/DSP” setting.

4.Use the R-14 (–, +) buttons to select “Chorus”.

•This enters the chorus effect mode, which enables the use of the chorus effect.

5.Use the R-17 (t, y) buttons to move the thick brackets (%) to the “Chorus” setting.

6.Use the dial or R-14 (–, +) buttons to select the chorus type you want to use.

•Refer to the separate “Appendix” for information about supported chorus types.

7.Press the C-5 (EFFECT) button or the R-15 (EXIT) button.

•This exits the effect setting screen.

E-35