• This displays the “Quantize” screen.
E-90
Press the C-11 (QUANTIZE) button.
3.
includes the events you want to quantize.
• See “To select a track for editing” (page E-85).
2. If required, you can perform a song playback operation at this time to check the range you want to select for quanitization.
• See “To play back a song from the event editor screen (Quick Play)” (page E-85).
Display the event editor screen of the track that
1.
4. Perform step 5 under “To quantize an individual note event” on page E-89.
5. Press the L-17 (START/STOP) button when you
want to play back with quantization applied.
• Note that the actual data still has not been changed yet.
6. Press the R-16 (ENTER) button.
7. In response to the “Sure?” message that appears, press the R-14 (YES) button to quantize or the R-14 (NO) button to cancel.
To quantize all note events within specific range of a track
Use the dial or R-14(–, +) buttons to change the setting in the thick brackets (%) to “All”.
3.
Press the C-11 (QUANTIZE) button.
• This displays the “Quantize” screen.
2.
Display the event editor screen of the track you want to quantize.
• See “To select a track for editing” (page E-85).
1.
Using the Song Sequencer
To quantize all note events in a track

4.Use the dial or R-14 (–, +) buttons to change the setting in the thick brackets (%) to “Locator”.

•This displays a range specification screen like the one shown below.

•If you have already specified a range using the locator screen (page E-74), that range will be displayed on the range specification screen.

Range start point

Range end point

5.Use the R-17 (u, i) button to move the cursor, and then use the dial or R-14 (–, +) buttons to change the value at the cursor position.

6.Perform step 5 under “To quantize an individual note event” on page E-89.

7.Press the L-17 (START/STOP) button when you want to play back with quantization applied.

•Note that the actual data still has not been changed yet.

8.After everything is the way you want, press the R-16 (ENTER) button.

9.In response to the “Sure?” message that appears, press the R-14 (YES) button to quantize or the R-14 (NO) button to cancel.