Casio CTK6000, MA1007-A, WK6500E1A manual 87

Using the Song Sequencer

	Event Type	 display during	 display	Parameter Name	Setting Range
 display	Event Name	insert
			PART	Part	UPP1, UPP2, LOWR,
RSnd	Part Reverb Send	[RevSend]			HARM
			VALU	Part Reverb Send	000 - 127
			PART	Part	UPP1, UPP2, LOWR,
CSnd	Part Chorus Send	[ChoSend]			HARM
			VALU	Part Chorus Send	000 - 127
			PART	Part	UPP1, UPP2, LOWR,
DspL	Part DSP Line	[DspLine]			HARM
			VALU	Part DSP Line	on, oFF
AVol	Accomp Volume*5	[AcmpVol]	VALU	Accomp volume	000 - 127
AScl	Accomp Scale*6	[AcmpScl]	VALU	Accomp Scale	on, oFF

*1 A chord event is not displayed as the event name at position 2, but rather as the chord root (C, etc.) *2 See “Fingering Guide” on (page E-124).

*3 Intro: intro pattern, norml: normal pattern, Vari: variation pattern, nFlOn: normal fill-in on, nFloF: normal fill-in off, vFlOn: variation fill-in on, vFloF: variation fill-in off, Endin: ending pattern.

*4 “C-” on the display indicates C-1 (one octave below C0).

*5 This setting corresponds to the function menu “AccompVol.” item (page E-99).

*6 For details, see “Specifying whether the Current Scale Settings Should be Applied to Auto Accompaniment (Accomp Scale)” (page E-22).

To select a track for editing

1.Perform steps 1 to 3 of the procedure under “To start an event editor operation” on page E-81 to display the event editor screen.

2.While holding down the R-13 (FUNCTION) button, use the R-17 (u, i) buttons to select the track you want to edit.

To play back a song from the event editor screen (Quick Play)

1.Perform steps 1 to 3 of the procedure under “To start an event editor operation” on page E-81 to display the event editor screen.

2.Press the L-17 (START/STOP) button.

•This starts playback of the song being edited from the first measure where the cursor is currently located.

•Playback stops automatically when it reaches the end of a song. To stop playback part way through, press the L-17 (START/STOP) button.

E-85