Using the Tone Editor

6. To save a rhythm after you edit it, hold down

 

 

 

the R-13 (FUNCTION) button as you press the

 

 

 

 

 

 

 

 

 

 

Pressing the R-15 (EXIT) button in place of step 6 displays

 

 

 

•

C-13 (MENU) button.

the confirmation screen shown below. Pressing the R-14

• This displays the tone editor menu.

(YES) button at this time will display the tone save screen in

7. Press the R-16 (ENTER) button.

step 9.

 

 

• This displays a screen for specifying the destination

 

 

user tone number and tone name.

 

 

Destination user tone number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To cancel the editor operation without saving the edited results, press the R-14 (NO) button.

Tone name

8.Use the dial or R-14 (–, +) buttons to select the destination user tone number you want.

9.Use the R-17 (u, i) buttons to move the cursor to the name character position you want to change, and then use the dial or R-14 (–, +) buttons to select the character you want.

•See “Supported Input Characters” (page E-124) for information about the characters you can input for the name.

•To input a space, press both of the R-14(–, +) buttons at the same time.

10.After everything is the way you want, press the R-16 (ENTER) button.

•A message (Replace?) will appear on the display to confirm whether you want to replace the existing data with the new data. Press the R-14 (YES) button to replace the existing data with the new data.

•The message “Please Wait” will remain on the display while a data save operation is in progress. Do not perform any other operation while it is displayed. Turning off the Digital Keyboard or removing the memory card can cause Digital Keyboard data to be deleted or become corrupted. It also can cause the Digital Keyboard to fail to turn on when the L-1 (POWER) button is pressed. If this happens, refer to “Troubleshooting” (page E-114).

E-47