Using a Memory Card

4. Use the R-17 (t, y) buttons to move the 0 to

 

 

3. Depending on the type of data you want to save

 

“CardFormat”.

 

 

to the memory card, perform one of the steps

 

 

 

 

shown below.

 

 

 

 

 

• All setup registration banks are saved as a batch. Other

 

 

 

 

data is saved in area (data item) units.

 

 

 

 

 

 

 

 

 

 

 

To save this

 

Do this:

 

 

 

 

type of data:

 

 

 

 

 

 

 

 

 

 

 

One user rhythm

1.

Press the L-9 ([F] USER RHYTHMS)

 

 

 

 

 

 

button.

 

 

 

 

 

2.

Use the dial or R-14(–, +) buttons to

 

 

 

 

 

 

specify the user rhythm number.

5. Press the R-16 (ENTER) button.

 

 

 

 

 

 

 

One user tone

1.

Press the R-12 ([L] USER TONES)

 

 

 

 

button.

• This will cause the confirmation message “Sure?” to

 

 

 

 

 

 

 

2.

Use the dial or R-14(–, +) buttons to

appear.

 

 

 

 

 

 

 

specify the user tone number.

 

 

 

 

 

 

6. Press the R-14 (YES) button to format the

 

 

 

 

 

 

 

One user DSP

1.

Perform steps 1 through 4 under “To use

memory card or the R-14 (NO) button to cancel.

 

 

 

 

a DSP” (page E-36).

 

 

 

2.

Use the dial or R-14(–, +) buttons to

• The message “Please Wait” will remain on the display

 

 

 

 

 

 

 

specify the user DSP number (101

while the format operation is being performed. Do not

 

 

 

 

 

 

 

 

through 200).

perform any Digital Keyboard operation while this

 

 

 

 

 

 

 

 

 

 

 

One user preset

1.

While holding down the L-7 ([D] WORLD/

message is on the display. “Complete” appears on the

 

 

 

 

 

 

VARIOUS) button, press the L-8 ([E]

display after formatting is complete.

 

 

 

 

 

 

 

 

PIANO RHYTHMS) button to display the

• Formatting may take as long as a few minutes to

 

 

 

 

 

 

 

 

music preset screen.

complete.

 

 

 

 

 

 

 

2.

Press the L-9 ([F] USER RHYTHMS)

 

 

 

 

 

 

 

 

 

 

 

button.

Saving Digital Keyboard Data to a

 

 

 

 

3.

Use the dial or R-14(–, +) buttons to

 

 

 

 

 

Memory Card

 

 

 

 

 

specify the user preset number.

 

 

 

 

 

 

 

 

 

One song

1.

Press the C-3 (SONG SEQUENCER)

 

 

 

 

sequencer song

 

button to enter the song sequencer mode.

To save Digital Keyboard data to a memory

 

 

 

2.

Use the dial or R-14(–, +) buttons to

card

 

 

 

 

specify the song number.

 

 

 

 

 

 

 

All registration

Press the C-8 (BANK) button to display the

 

 

 

 

1. Insert the memory card into the card slot.

 

 

 

banks

registration bank selection screen.

2. If the Digital Keyboard is in the card mode,

 

 

 

 

 

 

4. While holding down the R-13 (FUNCTION)

press the C-7 (CARD) button to exit the card

 

 

button, press the C-7 (LOAD/SAVE) button.

mode.

 

 

• This causes an “Xxxx Load”*1 screen like the one

 

 

 

 

shown below to appear. The sample screen below

 

 

 

 

shows the screen that appears from the rhythm screen.

 

 

 

 

 

 

 

E-104