Reference

 

 

 

 

 

Symptom

 

Action

 

Notes keep sounding, without stopping.

•

Turn power off and then back on to initialize all Digital Keyboard settings

 

 

 

(page E-13).

 

 

• Replace the batteries with new ones or switch over to AC adaptor power

 

 

 

(page E-9).

 

 

 

 

Some notes are cut off while they are

Notes are cut off whenever the number of notes being sounded exceeds the

 

playing.

maximum polyphony value of 48 (24 for some tones). This does not indicate

 

 

malfunction. See the separate “Appendix”.

 

 

 

 

 

The volume or tone setting I configured has

•

Adjust the main volume setting (page E-13).

 

changed.

•

Turn power off and then back on to initialize all Digital Keyboard settings

 

 

 

(page E-13).

 

 

• Replace the batteries with new ones or switch over to AC adaptor power

 

 

 

(page E-9).

 

 

 

 

Output volume does not change even though

• Change the Touch Response setting (page E-97).

 

I change my keyboard pressure.

•

Turn power off and then back on to initialize all Digital Keyboard settings

 

 

 

(page E-13).

 

 

 

 

In certain keyboard ranges, the volume and

This is due to system limitations. It does not indicate malfunction.

 

tone quality sound are slightly different from

 

 

 

those in other keyboard ranges.

 

 

 

 

 

 

With some tones, octaves do not change at

This is due to system limitations. It does not indicate malfunction.

 

the far ends of the keyboard.

 

 

 

 

 

 

 

The pitch of the notes does not match other

•

When the Bindicator is displayed, it means that the transpose setting

 

accompanying instruments or sounds

 

(page E-18) has been used to change the pitch of the keyboard. Return the

 

strange when played along with other

 

transpose setting to 00.

 

instruments.

•

When the C indicator is displayed, it means that the scale setting (page

 

 

 

E-21) has been used to change the Digital Keyboard’s initial default setting.

 

 

 

Use the procedure under “To select a preset scale” (page E-21) to change to

 

 

 

the “Equal” preset scale. If the C indicator remains on the display after

 

 

 

you select “Equal”, use the dial or the R-14(–, +) buttons to change to

 

 

 

another preset scale other than “Equal” and then select “Equal” again.

 

 

•

Turn power off and then back on to initialize all Digital Keyboard settings

 

 

 

(page E-13).

 

 

 

 

The reverb of notes seems to change

• Check and adjust the reverb setting (page E-34).

 

suddenly.

•

Turn power off and then back on to initialize all Digital Keyboard settings

 

 

 

(page E-13).

Operation

 

 

 

Tone, rhythm, and other settings revert to

The Digital Keyboard may be configured to restore default settings (factory

 

their initial defaults whenever you turn on the

default settings or settings registered by you) when power is turned on. If you

 

Digital Keyboard.

want the Digital Keyboard to remember its last setup and restore it the next time

 

 

it is turned on, select “on” for the Auto Resume setting (page E-100).

Computer Connection

 

 

 

I can’t exchange data between the Digital

•

Check to make sure that the USB cable is connected to the Digital Keyboard

 

Keyboard and a computer.

 

and computer, and that the device is selected correctly with your computer’s

 

 

 

music software settings (page E-112).

 

 

•

Turn off the Digital Keyboard and then exit the music software on your

 

 

 

computer. Next, turn the Digital Keyboard back on and then restart the music

 

 

 

software on your computer.

 

 

 

 

E-115