Using the Song Sequencer

 

System Track and Track 01 through 16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Common Recording Content

 

 

 

 

 

 

 

 

 

 

 

 

• Due to the way song parts are configured, settings

■ Recording Start

 

configured by a recalled registration are applied to different

 

numbered parts than they were assigned to when the setup

•

Note settings

 

 

was saved, as shown below.

 

•

Rhythm selection

 

 

 

 

 

 

 

 

Parts when registration

 

Parts when registration is

• Tempo setting

 

 

 

setup is saved

 

recalled for song recording

•

Scale setting

 

 

• The mixer settings below

 

UPPER 1 part (A01)

 

UPPER 1 part (A05)

 

 

– All part parameters from A04 through A07 and B01

 

 

 

 

 

 

 

 

UPPER 2 part (A02)

 

UPPER 2 part (A06)

 

 

through B16 (Excluding part on/off)

 

 

 

 

 

 

 

 

 

 

 

– Part parameters from A09 through A16: part on/off,

 

LOWER part (A03)

 

LOWER part (A07)

 

 

coarse tune, fine tune, scale enable, DSP line

 

 

 

 

 

 

 

 

Auto Harmonize tone part

 

Auto Harmonize tone part

 

 

– DSP parameters: volume, pan, reverb send

 

 

 

 

 

(A04)

 

(A04)

•

Effect settings

 

 

 

 

 

 

 

 

 

 

 

 

• Accomp volume

 

For details about the configuration of song parts, see

 

 

 

 

■ During Recording

 

“Songs, tracks, and parts” (page E-66).

 

• The moment you call up a registration setup or One Touch

• Keyboard play

 

 

Preset while recording, the setting information registered

•

Pitch bender operations

 

 

with the registration setup or One Touch Preset is recorded

•

Pedal operations

 

 

to the system track. The registration setup or One Touch

 

 

 

 

 

 

 

 

Preset itself is not recorded.

 

System Track Recording Content

Track 01 through 16 Recording Content

■Recording Start

• Tones for the UPPER 1, UPPER 2, and LOWER parts

■ Recording Start

•

Layer and split on/off

•

Part tone selection for the track

•

Split point setting

 

 

• Octave shift for the UPPER 1, UPPER 2, and LOWER parts

■ During Recording

• The function menu item settings below (page E-97)

•

Part tone selection for the track

 

– Arpeggiator hold, arpeggiator speed, arpeggiator part

 

•

The mixer settings below

•

Auto harmonize or arpeggiator on/off and type

 

– All part parameters from B01 through B16

•

Synchro standby (Normal, Variation, Intro)

 

 

(except part on/off)

• Music preset (Only when using EASY REC.)

 

 

 

■ During Recording

Panel Settings and Header Settings

•

Rhythm selection

Before starting recording with the song sequencer, you need

•

Tempo setting

to select the tone and rhythm, and also configure other

•

All of the items under “Recording Start” above, except for

settings such as tempo, mixer settings, etc. These are called

 

the function menu item settings and split point setting

“panel settings” because they are configured using the Digital

•

Chord play using the chord keyboard

Keyboard’s control panel. When you start recording, panel

•

The rhythm controller operations below

settings are stored in the header of the song. Settings in the

 

L-13 (INTRO), L-14 (NORMAL/FILL-IN),L-15

header of a song are called “header settings”.

 

(VARIATION/FILL-IN), and L-16 (SYNCHRO/ENDING)

•

The “Recording Start” settings under “System Track and

 

button operations

 

Track 01 through 16 Common Recording Content” (page

•

Settings recalled from registration memory

 

E-67), “System Track Recording Content” (page E-67) and

• Settings recalled using One Touch Preset

 

“Track 01 through 16 Recording Content (page E-67) are

 

 

 

stored as header settings.

 

 

•

Only header settings can be changed after song recording

 

 

 

is complete. For details, see “Using Panel Record to

 

 

 

Rewrite Song Header Settings” (page E-72).

E-67